-
Anonymous users2024-01-24The inclination of the bathroom tiles is generally about 1 cm to 3 cm per meter.
Bathroom brick paving according to the location of the floor drain design inclination, the conventional practice is around the center point of the floor drain distance of 1 meter height difference meters. Prevent water from spreading on the floor of the bathroom.
-
Anonymous users2024-01-23It depends on the size of your bathroom and the location of the floor drain. There is no preparation to make a shower room or something. According to these, let's decide the slope size View the original post
-
Anonymous users2024-01-22The slope is mainly determined by the size of the bathroom, that is, the length and width. There is also the location of the drainage.
Usually we refer to the slope in the decoration of the general family refers to the place where there is a floor drain, if there is no floor drain, it is not necessary to find the slope, especially in the kitchen, the ground is relatively dry, and there is no water flow to find the slope. The bathroom depends on how you decorate, if there is a floor drain, 2-3% to find a slope.
Wouldn't it be enough to raise the track to balance? Add some ground height.
As long as it is not horizontal, there are a few degrees, and the slope of the floor drain around it can be as long as it does not store water.
According to the ceiling, it is generally the meter elevation, of course, there is no dead provision, but the position of the bath bomb should not be too high, nor too short, other places can be arbitrary.
This is a must.
Otherwise, there will be stagnant water. It will be troublesome to change it in the future. >>>More