The reason why the overall shower room shakes after installation is that the overall shower room ins

Updated on Shower room 2024-08-27
2 answers
  1. Anonymous users2024-01-24

    Summary. Dear, it's a technical issue with the installation. The safety factor will definitely be reduced if the debugging is not good, so that the pulley is not well adjusted, the glass is not level and must run to the lower side, when the door is closed, there is either a gap above or a gap below It is easy to leak, the reason for the shaking is that the pulley adjustment is too loose, but the pulley structure shower room is normally a little shaky, too shaky is too loose.

    Why does the overall shower room shake after installation, is it because the installation of the overall shower room has not reached the horizontal position? Is it a matter of installation technology and responsibility?

    Dear, it's a technical issue with the installation. The debugging safety factor is not good, the hand will be reduced, so that the pulley adjustment is not good, the glass is not level and must run to the lower side, when the door is closed, there is either a gap above or a gap below is easy to leak, the reason for the shaking is that the pulley is too loose, but the pulley with fibrillation structure shower room is normal is a little shaking of the hall, too shaking is too loose.

    The glass door is a bit up and down not level.

    Kiss this is a glass door quality problem, or it may be an uneven ground.

  2. Anonymous users2024-01-23

    This is generally an installation problem, perhaps the installation technology of the installer is not in place, it is recommended to find their company to deal with it.

Related questions
3 answers2024-08-27

The first step should be for the installation of the basin. For the installation of the bottom basin, it is true that the waterlessness of the bottom basin is an important point. If there is moisture retained, it will have a great impact on the installation. >>>More

1 answers2024-08-27

What is a Integral Shower Cabin? The whole shower room is a kind of non-steam generating device, which is a sanitary unit composed of a sprinkler device, a shower room, a shower screen, a top cover, a bottom basin or a bathtub. The basic structure of the shower room is a chassis and a fence. >>>More

1 answers2024-08-27

1. The whole shower room is generally composed of a sprinkler device, a shower room, a shower screen, a top cover, a bottom basin or a bathtub, the shower screen is made of tempered glass, and the bottom cylinder and back plate are generally acrylic composite materials. The overall shower room is fully enclosed, with good thermal performance, and there is no need for a bath bomb even in winter. In addition, the overall shower room has complete functions, and some also have functions such as foot massage, surf massage, FM radio, steam, exhaust, and answering calls. >>>More

1 answers2024-08-27

The entire bathroom industry, the shower room, the whole room, and the steam room are all unpacked, packaged, and shipped, and then the dealer assembles it for the customer.

2 answers2024-08-27

Yes, the Edili shower room is installed on the door, and my shower room is Edili, and I have been using it for two years.