Advantages and disadvantages of light steel keel ceilings and wooden keel ceilings

Õ¹¿

õ¶dropped ceiling/sprung roof/false ceiling/suspended ceiling)ÊÇ

ðÊ?bdfc

Hello, the light steel keel is good, it will not be damp and deformed, but it is not convenient to do modeling, so there are many people who use wooden keels for home decoration, because it is convenient to do various shapes, but it is necessary to brush with moisture-proof and arson paint. You can use white pine wood ceiling, which is better or depends on personal needs, I hope my answer will be helpful to you.

The light steel keel is good, will not be damp, will not be deformed, but it is not convenient to do modeling, so there are many people who use wooden keels for home decoration, because it is convenient to do various shapes, but it is necessary to brush with moisture-proof and arson paint. Can be made of white pine.

Wooden ceilings. 1. Construction according to the order of operation.

2. The wooden keel has no knots, the wooden keel should be firmly connected, and the boom should be firmly connected with the wooden keel and the floor.

3. The keel should be coated with fireproof and corrosion-resistant coatings.

4. The ceiling keel is considered to sag in the future, so after installation, the center should be arched 1 200 according to the short side.

5. Where there are lampshades, curtain boxes and other positions, keels should be added, and ceiling fans should not bear force on the keel frame.

6. The cover panel should be flat, without warping, peeling, degumming and other phenomena, if there is a parquet, the pattern should be designed according to the regulations.

Slatted and steel wire mesh plastering ceiling.

1. The wooden keel grid is required to be the same as the wooden ceiling.

2. The slats joints must be staggered, the plate surface should not be too light, and the slats and steel wire mesh should be nailed firmly.

3. Lime paste must be fully cured, and lime-containing fixed particles are not allowed, so as to avoid bubbles after plastering.

4. The slats are dry, easy to absorb water and expand, and the plastering is dry and easy to crack after water absorption, so the bottom ash should be sprayed with water to moisten after drying, and then wipe the leveling layer to combine well with each other.

Light steel keel ceiling.

1. The selected light steel keel should meet the design requirements and ensure the quality.

2. All spare parts and keels in the ceiling should be galvanized.

3. The keel, boom and connector should be in the correct position, the material should be smooth, straight, firmly connected, and not loose.

4. Where there is a suspended load-bearing part, the transverse secondary keel must be added.

5. The boom shall not exceed 300mm from the end of the main keel.

6. The allowable deviation standard of quality can refer to the wooden ceiling. How to check the decoration quality of aluminum alloy keel ceiling, you can also refer to the light steel keel ceiling.

Wooden ones can express retro elegance. Style. There is a strong sense of history! Light steel is definitely more modern! It's more practical, it's not the pursuit of perfection, there is a high ability to appreciate, or light steel!

The wooden keel should be treated with moisture-proof! Now it seems to be all light steel keels.

These things about the suspended ceiling are finally understood today!

Corny! Now there are almost no suspended ceilings for decoration.