The bathroom has a single sided door cover, how to deal with the side?

It is also necessary to chamfer the inner corners, of course, to be tiled. But this location is all fixed size cut bricks, to be sent to the tile shop big machine processing! , the side file into the 2cm look, if you don't use the yang angle line, you can paste it!

File off the small half of the tile on the corner, the project manager is troublesome!. Masons don't cut neatly with gadgets!

Tiles, of course!! File off the small half of the tile on the corner, and file it 2cm on the side, you can paste it.

However, this position is all fixed-size cut bricks, if you don't use the yang angle line, you also need to chamfer the inner corner, and you have to send it to the tile shop for processing. The mason's gadgets are not neatly cut, and the project manager is troublesome.

The aluminum alloy door frame is not easy to disassemble.

Knock off the tiles on the side of the bar door frame, reapply the tiles at a 45-degree diagonal tile, and then apply the corner protectors. It is okay not to stick to the corner protection caulking, but when the tile is thrown at 45 degrees, there can be no broken edges, and it is not too ugly.

The door is in the wrong place.

It should be level with the wall tiles, and the bathroom should be the same as the bedroom. The appearance is consistent overall.

The single-sided aluminum sleeve you ordered should be in the bathroom.