-
Anonymous users2024-01-24Under amateur conditions, first find the direction of the line in the bedroom, and check whether each joint has poor contact, short circuit, or open circuit, such as the core wire and the shield mesh (outside mesh wire) are connected together (short circuit), and the shield mesh is not connected (open circuit). After inspection, there is no signal, so I can only find radio and television maintenance.
-
Anonymous users2024-01-23The interface is loose and not connected, find a cable company to take a look, no money.
It is repaired by the local cable network company, and you can call 114 to check their phone number. But there is one thing that needs to be reminded, your problem should be a problem with the home line, not a problem with the external signal, it is estimated that even if they come to check, they will not repair it, because the embedded line at home will not be repaired by them.
Yes, as long as this location can accept the router wireless signal well, you can use the wireless connection to access the Internet and watch TV.
If you do dark lines, plane the groove down the tube.
If the line is topstitched, the line is stuck on the wall. >>>More
The level signal sent by the current cable TV operator into the user end is generally about 75dB What is it like in your house I don't know but I think it won't be too long As long as the line is not damaged, you can pull up to 30 meters of the line indoors, generally about 10-15 meters, such attenuation is very small, generally about 2db As long as you don't connect in series, use the distributor to distribute it normally, indoors, generally do not need to consider the line attenuation, very small, see which terminal is close to your second bedroom, just take the signal source from there.
As long as there is a closed route, you can use the top basin anywhere!