-
Anonymous users2024-01-24I usually neglect lubrication and maintenance. The slide rail and pulley have great resistance, and the more they are pulled, the heavier they are, there will be abnormal noises, poor movement, inability to pull or even break the door handle, and wear out the slideway.
Professional sliding door wheel rail grease should be used, which is colorless and transparent, with good adhesion and good durability. Tiger head hotolube or Kruber can be used, with food-grade safety certification, suitable for household use. There are 130 grams of tubes in the hedge.
When using, apply directly to the slide rails and pulleys, and open and close the sliding door a few times.
Do not use lubricating oil and regular butter on the slide rails and slides of the sliding doors, as the lubricating oil will be lost quickly. Regular butter will have a harmful smell that is not good for the human body.
-
Anonymous users2024-01-23Answer: The reason why the sliding door can't be pushed is that the general common problem is that the block sinks and the screws are loose. Solution: Check that the side of the door is sagging, use a screwdriver to unscrew the side screws of the sagging side, gently lift the door, pry it up outward and gently knock the hanger to detach the door from the pulley, then use a screwdriver to twist the middle spindle screw of the block to make it the same height as the other side, and then gently lift the door and insert the block back into the sling, and tighten the side screws to solve the problem.
After the movable door is closed, if there is a crack on the upper or lower edge, first check the parallelism of the movable door, and adjust the pelvis or heart chakra to achieve parallelism; Check the verticality for deviations, and reinstall it if so. 3. Check the drain if the drainage of the bottom basin is not smooth or there is stagnant water, and whether the drainage pipe is blocked or unsmooth; Check whether the ground is level, whether the bottom basin is installed horizontally, and adjust it if it is uneven. 4. In case of water leakage, see whether the waterproof rubber strip is installed; Check whether the glass glue between the shower room, the bottom basin and the wall is installed; Check the tightness of the void between the basin and the wall; Check the drainer installation problem, the connection tightness of the drain pipe.
2. Pay attention to item 1 in the maintenance of the shower room, avoid hitting the movable door of the shower room head-on, so as not to cause the movable door to fall off; 2. Pay attention to regularly clean the shower room pulleys, slide rails, sliders, and fill lubricating agents, lubricating oils or lubricating waxes; 3. Regularly adjust the adjusting screws of the slider in the shower room to ensure the effective bearing and good sliding of the slider on the movable door.
Hope it helps, dear
-
Anonymous users2024-01-22If the door is deformed or the track is stuck, send a photo to help you take a look.
The glass door cannot be pushed because the lower end of the roller is worn out, and the glass door needs to be removed and replaced with new rollers. Tools required: utility knife, screwdriver, two new wheels, vise. Here's how: >>>More
Whether it's hanging or slipping down If you go down, it's basically an obstacle or the wheels are not right and you need to use a 6-edged wrench to pull it down.
Yidun doors and windows believe that usually most of the reasons are on the pulley, you go to check if there is a problem with the pulley. Or check the track for foreign objects obstructing the sliding door.
Aluminum alloy doors and windows will be opened, and the guide rails are broken.
Pay attention to the lubrication of the sliding door, the slide rail and pulley resistance is large, and the movement is not smooth. >>>More