-
Anonymous users2024-01-24The LED light is not lit, the reason is not to say other things (don't say that there is no electricity), in the case of electricity, 220V household electricity, if it is not lit, it is either the drive is broken or the LED light itself is broken. So you have to take a good driver and LED light to try.
-
Anonymous users2024-01-23What is the reason why the LED headlights in the living room are either burning the driving power supply or the sectionalizer is damaged.
It's hard to estimate, right? It's only been a day, is it that the power supply of the switch is loose and not connected properly? A lot of LEDs are not all kept for many years, and the parts inside are broken in such a short time, it is not difficult to imagine that you should return the goods and buy other brands.
It is not easy to find the problem just by looking at the connector with the naked eye, and there may also be problems with the inner network cable in the wall, so it is best to find a professional in this area to help you check it.
When the power goes out, the tap water will be stopped, and the reserve water in the toilet will run out, so naturally it will not be used.
Method steps.
1.Basic Functions Introduction: >>>More
The router settings do not move. First choice, if your home is a telephone bundled network, then you need a shunt (one end is connected to the outside line, and the other two ends are connected to the phone and the network line), the correct connection is that the tap and the cat should also be moved to the study (otherwise the phone will squeak), the outside line is connected to the cat, the cat is connected to the router again, the router is connected to the computer, and the interface here you can look at the original connection (the detailed method is: the external line is connected to the cat on the wan port, the inner line is connected to any other lan port, and the other end of the inner line is connected to the router wan port, One end of the cable connected to the computer is connected to the computer, and the other end is connected to either LAN port of the router). >>>More
Check whether the living room lighting circuit and the electric kettle are the same line, caused by overload, or because of the failure of the ballast or lamp, the sensitivity to voltage changes is too high, you can consider replacing it.