Can a leak in the bathroom be waterproof

OK! And now in the home decoration, the bathroom floor must be waterproof. The shower walls are all painted with waterproof materials! The rest of the front is brushed 50-100cm high.

Bathroom leakage, first of all, you need to find the cause of the leakage, and then deal with it according to the actual situation:

1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to repair the pipeline in time to solve the water leakage problem;

2. If there is no problem with the pipeline, then consider that the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to do the waterproofing again, so as to fundamentally solve the problem.

It is recommended to use kitchen and bathroom waterproof slurry for bathroom waterproofing, which is specially developed for the leakage parts of the bathroom, using the concept of local repair and strengthening and then waterproofing as a whole, the construction is relatively simple, and the waterproof effect is better than the general waterproof material.

The bathroom is a must-have space for every family, and a clean, dry bathroom environment can bring people joy. However, the bathroom will have problems such as water leakage after being used for a long time, so let's take a look at the practice of waterproofing the bathroom!

1. Before construction, determine the design of the water circuit, and consider the possibility, feasibility and availability of the design scheme in detail. Lay the water, electricity and heating pipes first, and then level.

2. During the construction of the base layer, the ground should be flattened with cement mortar first, and then waterproof treatment should be done to avoid leakage caused by uneven thickness of the waterproof coating. When paving, it should be painted evenly, and there can be no leakage, bulging and falling off, and attention should be paid to the waterproof dead corners during construction, the joints between the wall and the ground, and the joints between the water and water pipes and the ground.

3. After the construction of the waterproof layer, carry out a flooding inspection, block all the sewers, build a 25cm high barrier at the door, and then pour 20cm high water into the bathroom. After 24 hours, check whether there is leakage on the surrounding walls and ground, if there is leakage, it needs to be repaired in time, and then do a 24-hour water test without leakage after repairing before entering the next stage of construction.

4. After the protective layer of cement mortar is dry, you can pave the wall tiles or spray paint or pave the wallpaper on it to carry out normal decoration.

The above is about the content of waterproof practices, I hope it can help you. Friends in need can collect it, and it will help in the future.