-
In the dimension style manager, you can set several different dimension styles, select the large one if you want to mark the large size, and select the small one if you want to mark the small size. Enter the "D" command on the command line to enter the Dimension Style Manager.
-
Two methods: 1. Select tile X and modify it after breaking it up.
2 Enter the block interface to modify.
The first is to change the currently selected tile.
The second is to change the same tile as the current tile.
It's up to you.
-
Use the scale command to scale the furniture module to the size you need.
-
Not so coincidentally, the size of the module needs to be modified, and the size needs to be modified with the zoom tool (shortcut key SC).
-
Enter the blocker to refine the modification.
Yes, it can only be changed in a small area, and it must not be exploded, otherwise it will all become a line, and it will not be easy to do.
In the dimension style manager, you can set several different dimension styles, select the large one if you want to mark the large size, and select the small one if you want to mark the small size. Enter the "D" command on the command line to enter the Dimension Style Manager. >>>More
You'd better use a ruler to see if your drawing unit is too small, or if it's really your furniture that is too big. Then, if the furniture is really big, use the sc scale command, proportional selection or what, shrink the furniture, and then measure it down, the general bed must be 2 meters long, 1 meter wide or whatever, your furniture can not be less than this size, or the furniture is put in, and I feel that the room is very big.
In the dimension style manager, you can set several different dimension styles, select the large one if you want to mark the large size, and select the small one if you want to mark the small size. Enter the "D" command on the command line to enter the Dimension Style Manager.
You get under the CAD building template, a large piece, to do the decoration of everything you use!