-
Anonymous users2024-01-24The bathroom water pipe was wrong, and Purple Diamond thought about how far it was to see how far it was, and if it was close, you could open the tile and shoot the jar again.
-
Anonymous users2024-01-23There is no way around this, and soon I just have to pick up the tiles, re-fix the water pipes, and then put the tiles on the ground.
Remove the angle valve on the wall and install the mixer directly. First of all, you need to measure the distance between the two spouts and buy the right size mixer.
There is only one way, place the open box socket and the line open line groove board at the desired position.
The color of the leakage location will be a little darker, and if you can't find it, you can find the property department or decoration personnel to find it, and the best and fastest way is to press the pipeline, and the leakage location will naturally leak big, and the location is basically accurate.
Of course, before pasting tiles, you have to do a good job of waterproofing, first wet the wall with a water hose, about half an hour, let the wall absorb water thoroughly, and then paint it again with 325 grade cement oil, to paint a little better, some small holes, wall corners, all to be painted. >>>More
Now that you have done a waterproofing test, it is time to do a waterproofing experiment, and it is not recommended that you do it again now.