-
Anonymous users2024-01-23Remove the angle valve on the wall and install the mixer directly. First of all, you need to measure the distance between the two spouts and buy the right size mixer.
-
Anonymous users2024-01-22Change the tee at the angle valve, and then connect the water heater and shower separately.
Bathroom tiles have been pasted with water leakage, first determine the location and cause of the leakage, the water pipe first pressure to see if the leakage is not leaking, it may be a waterproof problem, or it may be the main road leakage, check one by one. If the waterproofing is not done well, it can only be smashed the tiles, and the waterproofing is done from the new, and the closed water test is done to ensure that there is no leakage, and then the bricks are laid from the new.
Of course, before pasting tiles, you have to do a good job of waterproofing, first wet the wall with a water hose, about half an hour, let the wall absorb water thoroughly, and then paint it again with 325 grade cement oil, to paint a little better, some small holes, wall corners, all to be painted. >>>More
If there is space for a shower room, you can do it, but if you don't, you can't do it.
If you have a wire, it's easy to do, you go to buy an electric water heater, which is generally installed for free, and after the installation is completed, you can ask the master to help you install the socket.
Bathroom tile paste bai, tile joints and water seepage, you can use waterproof dao fine joint agent to do waterproof treatment, the specific operation steps are as follows: capacity. >>>More