-
Anonymous users2024-01-24In series, two switches should be turned on at the same time.
Parallel connection can also be, but when used, can not be realized, two switches can be controlled at the same time, there should be no problem when in use, both can be turned on, when closed, the switch that is turned off, not the original switch to turn on the light, change a place to turn off.
The height of the switch of the bedside table is generally based on the corresponding height of the bed and the bedside table and the person sitting on the side of the bed can easily and conveniently use. Generally speaking, the switch of the bedside table should be 700 800mm above the ground (auspicious as shown in the picture).
The bedside table switch assembly is generally used in hotels, do you also install it at home? >>>More
If it is installed on the side of the bedside table, 30cm from the ground, if it is installed on the bedside table, it should be 5 15cm higher than the bedside table.
Usually 60mm is more handy. But it also depends on what kind of bed you have, if the bed has more than two ears, you have to put it in 80 to 90mm...
Higher than the bedside table, lower than the bedside, the bedside table height is generally 55-58, so the socket position is set at 10cm higher than the bedside table, if it is a lamp switch, of course, and the socket is separated, the switch position of the lamp is 1 meter, the socket is 30 cm above the ground, so as to be installed 5 to 10 cm above the bedside table, so that the wall is inside, do the socket with a safety switch, so that it is safer.