What is the general height of the bedside table switch?

Higher than the bedside table, lower than the bedside, the bedside table height is generally 55-58, so the socket position is set at 10cm higher than the bedside table, if it is a lamp switch, of course, and the socket is separated, the switch position of the lamp is 1 meter, the socket is 30 cm above the ground, so as to be installed 5 to 10 cm above the bedside table, so that the wall is inside, do the socket with a safety switch, so that it is safer.

The bedside table is between 400 and 600 mm wide and 350 to 450 mm deep, and the bedside table is between 500 and 700 mm in height.

It is based on the principles of mechanics and ergonomics, the State Department of Light Industry issued a standard size of a bedside table.

When choosing, consumers should combine the height of the bed and match the corresponding bedside table.

1. The height of the socket and switch: it must be higher than the height of the bedside table. (Because some bedside tables are now more than 70 cm high, which is significantly higher than the current height of switches and sockets, if not changed, bedside tables will not be able to be placed against the wall in the future).

2. The left and right positions of the switch are very related to the arrangement of the bed, if it is installed too much, the switch may be just behind the back of the bed, so this is also very important.

3. The location of the socket: Compared with the switch, the position of the socket is not too big, but if the position of the socket is lower than the bedside table and just blocked by the bedside table, then it will be very inconvenient to use.