How to get the last few centimeters of the integrated ceiling

Cut a gusset that is one centimeter larger than the penultimate piece to the length and width of the negative corner line of the gusset to make the last piece, and then insert the negative angle line and shoot back into the penultimate piece of tongue and groove. Don't nail the penultimate piece first, press the last piece into the groove, the size of the last piece is important, a little larger than the required size, and then shoot the last piece back after pressing the penultimate piece into the groove.

1. First understand the installation structure of the integrated ceiling. The main bone is fixed on the roof, and the auxiliary keel is connected at the bottom, and the lamp and hanging plate are stuck on the auxiliary keel. >>>More

In fact, the surface of the integrated ceiling is aluminum plate, but it is processed on the top of the aluminum plate, like you said that the surface has a pattern, they just do some processes on the basis of the aluminum plate, for example, there is a flower on it, they carve a flower shape on it and then paint it with other colors and then process it, this is a frosted roller coating plate trial. Like others, it is directly on the basis of the aluminum plate to paste a layer of film, this film has a pattern on the top and the thickness is up to the national standard, this film is called the laminated board, very durable, economical and beautiful. And this coated aluminum base material is processed from three metals of aluminum, magnesium and manganese with thickness.

You can go to Shanghai Group Buying Network to see, where you can do a good job, I hope you can also make your home beautiful.

If it is not standardized, the fire department will normally require you to dismantle it. If the fire protection is not up to standard, you will be out of business.