-
Anonymous users2024-01-24Will there be mold on the back panel of furniture, will there be mold if the partition is treated, in fact, as long as you pay attention to it, it will not be, the following are some reasons and solutions for moldy back panels of the wardrobe, for your reference. Reason: The wardrobe plate is damp when it enters the site, the back of the wardrobe is not treated with moisture, it is affected by the moisture of the south day, and the water pipe in the bathroom next door is leaking.
If it is not due to dampness and mold, it is likely to be caused by leakage of the bathroom pipe. In order to rectify this situation, it is necessary to remove the tiles in the bathroom, dig out the water pipe, do a pressure test, and check which part of the leakage can be rectified. Wardrobe back panel mold treatment method:
1. When the weather is humid, try to turn on the air conditioner or dehumidifier as much as possible. 2. Mildew can be wiped off with alcohol. 3. Opening windows can indeed ensure air circulation, but in the wet season, opening windows is a big taboo.
When humid air hits, don't open the windows to breathe! 4. On rainy days, you can wrap quicklime in cloth or sacks and place it in various places indoors to keep the indoor air dry. 5. Wipe the inside with a damp rag first, generally you can wipe it clean without detergent, and then ventilate and dry it.
Pay attention to the clothes that you will wear in the future and do not put them in for a long time, especially the clothes that have passed the winter must be handled before putting them in. 6. The south is very humid, and it is often necessary to take out the clothes to breathe and see the light, so that it will not be moldy. (The last thing is to check if it is caused by the wall, if it is moldy from the outside in, so you have to find a way to solve this part of the problem.)
The wardrobe should not be too close to the wall.
-
Anonymous users2024-01-23Generally, no. However, due to the rainy season, unventilation and dampness can cause mold again. It is recommended to wipe the moldy area with a towel and spray some anti-mold agent, even if it is wet, it will not become moldy, thank you!
-
Anonymous users2024-01-22The wall against which the back panel rests should be damp, and it is fundamental to solve the dampness.
-
Anonymous users2024-01-21Absolutely, because you're not dealing with mold, which is characterized by easy growth, fast multiplication, and easy to spread to the neighborhood to multiply. Therefore, it is necessary to carry out anti-mildew treatment for bottom measurement.
-
Anonymous users2024-01-20It depends on whether your family is trendy or not.
Sometimes it took a lot of effort to buy back the furniture soon began to mold, this time to pay attention to, the reason for the furniture mold is mainly determined by the indoor temperature, if the humid environment for a long time, the furniture will soon cause mold, this is a certain probability, if you want to make the furniture not moldy, you must keep the room dry, when the mold phenomenon opens the window for ventilation, this has to be good, out of the sun, if it is the rainy season, especially in the southern region often rain and south wind days, The indoor will be damp, so it is necessary to close the window, very serious to turn the air conditioner in the dehumidification mode, you can also turn the air conditioner in the heating mode higher than the current temperature, so that the indoor temperature increases, evaporate the moisture, do not remember not to open the air conditioner for a long time, if there is no air conditioning friends can use a pot of charcoal or put some lime powder in the corner, so that you can also absorb the moisture in the air, the furniture will not be moldy again. Then use a dry towel to wipe the moldy surface clean, and then brush with transparent paint to isolate the surface of the furniture from external influences, so that the mold will not be more serious.
Melamine decorative panels are mostly used for panel furniture, which are affected by the environment and are prone to mildew during the actual use of such furniture. Therefore, many brands carry out anti-mildew and antibacterial processing on their boards, and this kind of anti-mildew and antibacterial processing is mainly carried out on their surfaces and edges. >>>More
Leather furniture mold, leather shoe polish will, buy colorless or leather shoe polish similar to the color of leather, as well as special leather oil, oil with a brush to brush evenly, in the silk cloth on the line, if the wood can be used mold remover, anti-mildew agent and other mildew removal, first use the mold remover to remove the mold on the bed thoroughly, and then spray wood anti-mildew agent, which can prevent the bed from mildew, no longer mildew.
I put furniture on a stylish appearance and add layer decoration!
The newly bought furniture is moldy, it seems that the material has not dried thoroughly, as long as the furniture is placed in a dry environment, it should not be moldy in the future.