How to install the toilet lid and what to do if the toilet seat is broken

Nowadays, the length of the toilet lid is basically more than 50 cm, but many toilet covers have reached about 52-58 cm, and the length of the inner diameter of the seat corresponding to the size of the toilet lid is basically about 30 cm, and when we buy the toilet cover, we can measure the length of the toilet bowl to the front tip of the water tank along the center line of the toilet, which is generally more than 50 cm. Toilet lid option 2 The current toilet lid size and width are basically between 34-39 cm, so that the width of the toilet lid can basically be covered, because the size of many toilet covers can be adjusted, so the size of the two mounting holes of the toilet lid is best between 14-19, or there are some convex parts at the lower part of the water spray rod of some smart toilet covers, so the inner diameter length of the toilet lid is as large as possible, and the details can be seen in the toilet installation diagram. Toilet lid installation steps And the broken toilet lid directly remove the fixed bolts behind the toilet, remove the broken toilet cover, and the bolt position of the toilet is generally not easy to find, some toilets are in the light, some are in the dark, the bolts in the dark are generally on the side of the toilet by the tank, as long as the lid is opened, put your hand into it, and wipe it in the direction of the tank, you can touch it.

We can take off the bolts of the toilet lid directly in the open place, and then install the adjusted toilet lid on the toilet, because the size is not divided into sizes, so after the bolts are adjusted, fix the screw cap against the two holes. When replacing the toilet seat, we only need to fix the screw at the back of the toilet.