Mobile toilets and sewage lifters

The use of small sewage lifters and sewage lifting pumps is becoming more and more extensive, but for those who are in contact with the sewage lifting device for the first time, the hydropower installers are still at a loss, and they are not sure how to install and pay attention to things.

The diameter of the discharge pipe of the small sewage lifting equipment should be 32mm, and the minimum should not be less than 25mm; If the original drainage pipe diameter is 40mm or 50mm, please consult us first to determine whether to install, this equipment greater than 50mm can not be satisfied;

If you want to connect the trachea, you can take out the activated carbon filter and the rotating ball, and insert the 40mm tube directly into the vent, the vent tube needs to lead to the outside, of course, you can also choose not to take the outer tube, with the standard filter;

It is recommended that the power supply of the sewage lifter be equipped with a European standard socket, because the European standard socket at both ends has a grounding wire to prevent the risk of electric shock;

If the sewage lifting pump is connected to the toilet, the horizontal direction of the toilet and the equipment should not be longer than 30 cm, otherwise it is necessary to consider sufficient slope to ensure that the sewage can flow smoothly into the equipment;

If the small sewage lifting equipment is connected to the shower or bathtub, ensure that the drain outlet of the shower or bathtub is at least 18 cm higher than the plane of the equipment, otherwise there is a possibility that other sewage may overflow from the shower outlet when discharged;

The pipe entering the sewage lifting equipment can choose ordinary PVC pipe, because the inlet water is not pressurized;

The pipeline that discharges water from the sewage lifting device must choose a pipe that can withstand pressure, and the family can choose PPR, PP, UPVC, iron pipe, etc.;

If the horizontal distance of sewage discharge is relatively far, it must be lifted vertically first, and then discharged at a certain slope in the horizontal direction;

The drainage pipe of the sewage lifting equipment is generally connected to the gravity flow drainage pipe of the upper layer (the sewer pipe of the upper layer), but it must be ensured that the drainage pipe of the equipment is higher than the gravity flow drainage pipe, and then bend down into the equipment, which can effectively avoid the backflow of sewage;

Sewage lifting equipment should not be installed in the equipment pit as much as possible, once installed in the pit must ensure that the pit is dry and can not enter the water;

Yes, but the pipe can not be made of plastic pipes, and the outlet of the fecal tank is connected to the sewage lifter, so I think that the sewage lifter is below the downturn, and the sewage lifter does not have a set of water tanks, which can be directly used as a septic tank.

Is your mobile toilet the kind of toilet that can be flushed? If it is a flushing toilet, you can directly use the rear drain toilet and the sewage lifter installed on the ground. And this sewage lifter must be with a reamer.

Many imported sewage lifters are in this way, and it is best not to go to the ground for the pipe. In this way, the sewage lifter can push the sewage level into the well.

Look at you really stayed up all night, it is estimated that the height of your mobile toilet from the ground is generally about 30cm, directly connected to the sewage lifter will be blocked, you add a 220V sewage lift pump with crushing function, regularly open or install a float linkage, the float must be installed in the grille. It is better to dig a small trench in the ground.