-
The sliding door of the shower room should be made of tempered glass with a thickness of at least, and a thicker one should be selected for a large area.
5 sq.m03 = cubic meter. plus 10% loss and original short, coarse sand square meters kg); >>>More
Do you mean ceramsite backfill or ceramsite concrete cushion? >>>More
What materials did you use to waterproof your bathroom? If it is a waterproof coating or mortar waterproofing agent, then you can not knock off the non-brushing, you only need to knock off the tile to expose the cement base. Then sweep the base surface and sprinkle it with water to moisten. >>>More
The height is determined according to the need, generally speaking, the bathroom is waterproof 180 cm high, and the non-shower wall waterproof coating cannot be less than 35 cm in principle. However, in order to strengthen the waterproof effect, it is recommended to achieve a uniform height of 180 cm. In addition, for the light wall of the toilet and bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top. >>>More
The wall surface is flat 2 inside, and some are better. It's hard to say if it's uneven, so you have to level it first and then post it.