-
Anonymous users2024-01-24It is very likely that the toilet is not well sealed around the floor - it is recommended to use (sealant) or (plugging king) to do the sealing treatment.
Toilets, like cars, need to be lubricated (need to be maintained).
Hope it helps——
-
Anonymous users2024-01-23Because the quality of your toilet is not good, the inner wall of the S curve is glazed with good quality, and the poor quality is not, and the inside is rough. The toilet bowl S curve has been used for a long time, the glaze is smooth, the stains cannot remain, and the quality is not returned, because it is rough. Stains tend to remain.
A little adds up. Then you will slowly get into the water and it will become stress-free.
-
Anonymous users2024-01-22The main thing is that there is dirt in the S-bend! The way to save money is to buy a hand-cranked dredger, and it will be better to dredge it often!
If the rubber kick is broken, buy a new one, and the wire is generally ineffective, because there is a backwater bend, so the straight wire can't reach the blockage at all. Just waiting for someone else's idea can't fix your toilet, and a rubber kick won't cost a few bucks! >>>More
In the first case, it is clear that the quality is not up to par, the water pressure is not enough, and the pipes are too thin. >>>More
The flushing capacity should be fine, if the flushing capacity is okay, there is no need to change the toilet, after all, a toilet is not cheap
The toilet is not clogged underneath, and the water goes down quickly when the bucket is reached, but the water is very slow when the button flushes, which is why.
With the development of society now, many things have gradually appeared in our lives, enriching our lives. The flushing toilet is a kind of furniture that is used more frequently now, and it is also relatively convenient to use. But sometimes the toilet will also break, such as the toilet flushes automatically, so it will be a waste of water, and many friends don't know what to do. >>>More