What is the matter with the toilet flushing when it is not strong and not clean

Common causes of toilet flushing weakness:

1. The side handle chain of the side press and side wrench toilet is long, which causes the water stop pad to stop the water quickly, although it has action. Solution: Please shorten it to the appropriate level. Or the top press bar of the top press toilet is low, resulting in the water stop pad moving but quickly stopping the water.

Solution: Open the lid of the water tank, reverse it, and loosen the nut of the pressure rod.

Adjust the length of the pressure bar to the right one.

Second, the water level of the inlet valve is low, resulting in weak water outlet.

The solution is to remove the inlet valve and remove the inlet valve buckle. Turn the inlet valve body counterclockwise. Then increase the height of the body accordingly.

Then rotate the inlet valve body clockwise and attach the buckle. Finally, install the inlet valve. Connect the filter and water inlet pipe, and the fault can be eliminated.

3. Ceramic hanging pollution:

The ceramic glaze of the toilet bowl is not smooth enough, which is easy to hang dirt, and it will also cause the flush to be unclean.

1. If there has been a similar situation, it is a product quality problem and the glaze material is not good, so let the merchant come to deal with it.

2. In the past, it could be cleaned, but now if it can't be cleaned, clean it frequently, and don't use too corrosive washing liquid, which will damage the ceramic glaze and make it easier to hang dirt in the future.

Fourth, the solution of ceramic hanging pollution:

In general, it is good to brush directly with a toilet brush. If it is always easy to get dirty, a good toilet with ceramic glaze is better, use cheap toothpaste, be careful to be white, not the transparent kind, and then scrub with the green or blue rough side commonly used for dishwashing. If you haven't cleaned it for too long, you can use a steel wool ball to gently wipe it first.

However, the use of steel wool balls and decontamination powder will damage the ceramic glaze, so it is recommended not to use it.

It can only mean that your toilet is a bit outdated, it's time to replace it with a new one, and the toilet that flushes more vigorously is about 400 yuan, and the installation cost is about dozens of yuan.

It may be that the water pressure is not enough.

The water pressure is not enough! Rush again!

Don't press once and go, press a little longer.

The toilet flushes hard and can't be cleaned? You don't need to find someone to repair it, teach you a trick to solve it easily, save money!