-
LED lights can emit light if they have inductive electricity, check whether the switch of the bulb is broken by the zero line or the live wire, the switch will have this phenomenon if the zero line is broken, and the switch should be controlled by the zero live wire.
-
When the switch is still bright or flashing, it should be the switch that controls the neutral line, and changes it to the switch to control the live wire.
Poor drive contact.
The sensor cord plug is plugged in the wrong position during maintenance, and the white two-core plug is plugged into the white socket and the alarm does not work, and it is generally mistaken that the white plug should be plugged into the white socket, and it should actually be plugged into the purple socket in the middle, and the white socket is empty.
The LED light can't be broken, only the module is a problem. >>>More
Hello :
1. The new type of [LED] panel lamp is powered by [high-frequency transformer]. >>>More
Common problem, just swap the zero and fire of the wire.