-
Anonymous users2024-01-24One. Common tools for installing stainless steel squatting toilets: tape measure, level two.
Common materials for installing stainless steel squatting toilets: raw material belt, glass glue or oil sludge.
Procedure 1 for installing stainless steel squatting toilets, according to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the inlet of the sewer pipe and the ground level.
2. The depth of the pit reserved for the installation of stainless steel squatting toilets under the ground is greater than the height of the toilets.
3. Insert the connecting rubber plug into the water inlet hole of the stainless steel squatting toilet and clamp it tightly. Apply a layer of glass glue or putty to the outer edge in contact with the water inlet hole of the stainless steel squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug so that it is well sealed with the rubber plug to prevent water leakage.
4. Coat a layer of glass glue or putty on the edge of the outlet of the stainless steel squatting toilet, insert it into the inlet of the sewer pipe, and set the toilet horizontally with coke slag or other fillers.
5. Open the water inlet system to check whether there is water leakage at each joint, and if there is water leakage, check the situation of each joint. until the problem is resolved.
6. After checking that there is no water leakage at each joint, fill the toilet around with filler, and fill the contact surface between the ceramic and cement mortar.
Elastic materials such as asphalt or linoleum over 1 cm.
7. Fix the stainless steel squatting toilet in the horizontal plane with cement mortar, and then pave the bathroom floor tiles on the cement surface after it is stable and stable.
8. Test flushing, if there is no abnormality, it can be used. Four. Installation of stainless steel squatting toilet attention to matters 1, stainless steel squatting toilet fully in contact with the concrete part of the part should be filled with asphalt or linoleum and other elastic materials, otherwise the toilet will be broken due to cement expansion.
2. When finishing with heat-dissolved asphalt, the toilet should be avoided from being heated and causing it to break.
3. The toilet installation should be strictly controlled in accordance with the instructions, otherwise the toilet will be broken.
4. The stainless steel squatting toilet water inlet flushing device should have ball valve, high water tank flushing, electromagnetic feeling flushing valve, delayed flushing valve, manual flushing valve, etc.
5. Avoid violent impact when installing and utilizing.
It is advisable to choose a toilet for personal family use, and squatting is suitable for public toilets, and the hygiene of few people in your own family will not be bad.
It depends on the composition and habits of the family members, that is, according to their own needs!
Well, in general, a person is used to it, and I am used to steamed bread, and there is no way to do it, but the steamed bread is good. Of course, some people like to squat.
Install a toilet, because it is convenient for your family, install a urinal on the first floor, and a toilet on the second floor, so that it is more practical.
Look at personal preferences, there is no best, only the most suitable, often constipated, each time it takes more than ten minutes, or the toilet, squatting feet numb can not be solved, with squatting toilet too hard.