How to distinguish solid wood from beech furniture from the surface

Updated on Solid wood 2024-08-01
2 answers
  1. Anonymous users2024-01-24

    The furniture classification is: solid wood (all the same kind of solid wood, all different kinds of solid wood, solid wood plus wood-based panels) and non-solid wood (completely wood-based panels).

    Beech furniture refers to the use of beech solid wood furniture, beech veneer furniture and beech wood grain furniture wood, beech solid wood furniture, a large area of non-defective beech wood made of furniture, which is quite expensive, very heavy, mainly to see whether the pattern at the corner of the board is coherent and whether the pattern of the inner board and the outer board is consistent;

    If there is no pattern on the surface of the board or it is not real, it is not solid wood, if the pattern at the corner is inconsistent, it is solid wood veneer, and if the pattern of the inner board and the outer board is inconsistent, it is not all beech wood furniture.

  2. Anonymous users2024-01-23

    Beech is a type of solid wood, and the characteristics of beech wood:

    The bark is hard, grayish-brown, with coarse wrinkles and small protrusions; The branches are thin, the leaves are alternate, arranged in two rows, elliptic-ovate, single-serrate, pinnate veins, hairy, and the petioles are very short. In spring, small pale yellow flowers bloom, unisexual, monoecious. After flowering, it bears small fruits, slightly triangular.

    This wood material is strong and beautiful, and can be used as a building and utensils material.

Related questions
4 answers2024-08-01

Hello, solid wood material selection, drying, finger jointing, seams and other requirements are very strict, if which process is not strict inside, small will appear open cracks, loose joints and other phenomena, the whole set of furniture deformation, so that it can not be used. Discrimination can be analyzed from the following points: >>>More

1 answers2024-08-01

Pure solid wood is basically not attached to the skin or in the key parts of the small amount, such as handrails pure solid wood furniture, it is best to look at the wood material, because you can do pure solid wood furniture, wood is superior, like mahogany, if you are afraid of the business fake, you should pay attention to whether the buckle joint has been treated with other reagents, good wood waterproof and antiseptic effect is its own, so with less reagent treatment, to maintain the nature of the original wood is more obvious. >>>More

1 answers2024-08-01

Judging from the existing sample wood furniture, from the Ming and Qing dynasties to the Republic of China, there are all kinds of tables, desks, chairs, stools, cabinets, and beds. Especially the bed, the cabinet is the most distinctive, the variety of the bed is complete, the Luohan bed, the shelf bed, the step bed can be seen, the Luohan bed is often the same as the Huanghuali Luohan bed, the shelf bed, the early stage of the step bed is more than the lattice, the square, the 10,000-character grid, the psychic is sophisticated, and when it comes to the Republic of China, there are glass, mirrors and porcelain plates. The most common and distinctive of the cabinets is the rounded corner cabinet. >>>More

2 answers2024-08-01

1. Observe natural defects: generally solid wood furniture has a certain amount of scarring, some scars will extend to the back of the board, look at the location of one side of the scar and knots, and then find out whether there is a corresponding pattern on the other side, if symmetrical, you can determine that it is all solid wood furniture. Some scars only extend to the middle of the wood, so it is not convenient to look at the back here. >>>More

2 answers2024-08-01

Log furniture is a whole piece of wood or a piece of wood used, without traces of splicing, generally original cypress. >>>More