How to distinguish solid wood from board wood furniture

Hello, solid wood material selection, drying, finger jointing, seams and other requirements are very strict, if which process is not strict inside, small will appear open cracks, loose joints and other phenomena, the whole set of furniture deformation, so that it can not be used. Discrimination can be analyzed from the following points:

One: Listen to the percussion echo everywhere.

Two: look at the curvature and wood grain.

Three: The touch of the wood grain is natural and smooth and there are no seams.

Four: see whether the solid wood furniture is made of solid wood.

Five: distinguish the real from the fake according to the weight of the wood.

smell the smell; The smell of solid bai wood furniture is relatively small, and it is the zhi smell of the wood itself, which is not pungent.

dao, the smell of plate furniture is relatively heavy, and it is obvious when you open the door;

See; The inside of solid wood furniture is not painted, and the inside of panel furniture will be painted.

Ask for the price; Solid wood furniture is more expensive, a set of pine wood also costs more than 10,000 yuan, and a good one is even more expensive.

1. Blockboard.

Bai: The middle of the blockboard is a core bonded by natural wood strips, and a thin veneer board is glued on both sides, which is one of the most commonly used materials in solid wood office furniture, and has a good moisture-proof effect. When selecting, look at its internal wood, it should not be too broken, and the gap between the wood is about 3mm blockboard. Due to the unsightly appearance of the wood grain exposed on the surface, it is rarely painted directly, and veneer plywood is usually pasted.

The plate deformation is small, the nail holding force is also better, and the price is higher.

2. MDF and particleboard:

Particleboard is a natural wood crushed into granules and then pressed into boards, which is the main material of office furniture. MDF is formed by pressing powdered wood chips, which has good flatness and poor moisture resistance. The nail holding force of MDF is worse than that of particleboard, and if the screw is loosened after screwing, it is difficult to fix it again because the strength of MDF is not high, so it is rarely used to make cabinets that need to support gravity such as filing cabinets.

3. Integrated board:

The emerging solid wood materials, made of high-quality imported large-diameter logs, staggered splicing like fingers, superior environmental performance, is the blockboard allowed to contain formaldehyde 1 8, can be directly colored, painted than the blockboard to save a process, not easy to deform.

Pure solid wood office furniture is positioned higher, the market pricing is more expensive, in addition to paying attention to the price, it is necessary to go to the manufacturer to inspect the product on the spot. I have friends who have bought the products of Qingdao Huiteng Furniture, and the response is not bad, so you can take a look if you are interested.

Today's furniture to say that it may be a little difficult to say that it is completely environmentally friendly, 1, although solid wood furniture does not have a lot of glue for panel furniture, but in the actual processing process or to brush a variety of varnishes or paints, it is impossible to put together the entire original solid wood, even if it is more environmentally friendly than solid wood, log furniture can not meet such requirements, and there is not such a complete piece of wood for us to use to make the overall furniture, all need to be glued or hot-pressed, just the difference in quantity. Relatively speaking, it is closer to the environmental protection standard than the plate type, 2, but from the analysis of stability and service life, the solid wood is large, and it is easy to crack or deform due to thermal expansion and contraction due to the dryness and humidity of the environment. The plate type is pressed with high temperature and high pressure such as broken wood chips or broken wood blocks and wood strips, in which the internal structure is relatively tight, especially the finger joint board is plugged up and down, which is stronger in pressure resistance and not easy to deform and crack.

3. From the point of view of appearance, the solid wood is more stable and high-end, and the surface is covered with varnish or high-gloss or matte paint, which is smooth and rich. If you don't mind, if you don't mind, its casual and rough texture can express our natural and primitive attitude towards life. Of course, it also depends on the size and style of the whole space, if the simple, convenient and transparent layout furniture can make you feel the pleasure of life, then the layout is also a good choice.

From the perspective of a person who has worked in furniture design, maybe the analysis is not thorough enough, maybe you can search for it from the Internet casually, there are many similar answers, but the words I typed out of the keyboard word by word are from my own experience, I hope to give you some good advice.