-
Anonymous users2024-01-24I don't know you, if the toilet base does not leak, and then it does not affect the appearance, you can use marble glue [marble glue] to glue it, and then use an angle grinder to smooth it; You can make do with glass glue, but the effect is not good, if it leaks, I still think about it, buy a new one.
-
Anonymous users2024-01-23Go to the local ceramic market to find a professional toilet repairer, they generally use plastic steel clay (a special ceramic glue), and then spray white paint, which has no effect on the water and use. Fees range from 50 to 80
-
Anonymous users2024-01-22It is recommended to replace it with a new one! Even if it is repaired, it will not last long! Moreover, the ceramic is prone to water leakage after repair.
The ceramic product cracked, and now it seems that no one has repaired it.
With Jinshida multi-functional soft rubber, the sealing and waterproof leakage repair effect is very good. You can try.
1. Before the installation of the toilet, check whether there is sediment, debris and other blockages in the sewage pipeline, whether the installation surface is level 2, determine the sewage pipe and draw a cross line 3, determine the sewage outlet of the toilet and draw a cross line 4, determine the installation position at the bottom of the toilet with an electric drill and bury the expansion screw 5, install a special sealing ring (i.e., steamed wax orchid or rubber orchid) at the sewage outlet of the toilet or circle glass glue (putty) or cement slurry cement and sand ratio 1:3 6. The toilet crosshairs and the surface crosshairs are quasi-consistent, and the bottom of the toilet is circled, glass, glue (putty) or cement mortar, cement and sand ratio: 1:3, and the toilet installation should be kept horizontal; 7. Tighten the screws for the installation holes of the toilets; 8. Install and debug the water tank accessories, install and connect the water source, check whether the water inlet valve is inlet and sealed, check whether the drain valve and the installation position should be installed closely, whether the leakage check whether the button is closed, whether the chain is short, whether it is appropriate, whether the machine is jammed, check the leakage, install the water inlet valve filter device 9, If you find any differences in the trial process of adjusting the toilet, please refer to the toilet tank accessories to see the fault and treatment, check and deal with 10, the toilet installation should wait for the glass glue (putty) or cement slurry to solidify and discharge water, and use the curing room 24
As long as there is not too much water, or the temperature at home is not very low, it will generally not freeze and crack, and outdoor water pipes and sewer pipes may be frozen and cracked if they are not protected, so in winter, it must be wrapped through this kind of pipe to prevent freezing and cracking.
I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More