-
Anonymous users2024-01-24When choosing solid wood furniture, you should pay attention to the following places:
1 Determine if the furniture is really made of solid wood.
Mainly look at the door panels and side panels.
Tips: Scarring, wood grain, and sections.
Scarring: Look at the location of the scarred side, and then look for the corresponding pattern on the other side.
Wood grain: The appearance seems to be a pattern, so according to the position of the pattern change, look at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is pure solid wood.
Cross-section: The color of the cross-section is darker than the panel, and it can be seen that it is made of a single piece of wood.
2. Look at the tree species.
What kind of tree is solid wood made of, which directly affects the price and quality. From the cheapest pine, oak, to expensive mahogany, the price difference is dozens of times. Therefore, don't ignore the tree species because it is solid wood, after all, solid wood such as pine, in addition to environmental protection, has much worse performance than wood-based panels.
3. Judge the origin of solid wood manufacturers.
Special attention should be paid to the origin of solid wood furniture and wood manufacturers. There is an old saying that "solid wood is not the Yangtze River", that is, after the solid wood furniture produced in the south is transferred to the north, it will be prone to cracking and deformation due to the influence of the climate on the moisture content. Therefore, when purchasing, you should see the origin.
4. Observe whether there are defects in the wood.
Several major defects of solid wood: cracking, scarring, insect eyes, mildew.
Look at every detail carefully when buying.
Cracking: Naturally can not be bought.
Scarring: If there is a scar on the front, there is also a scar in the same position on the back, this scar is basically a dead knot, and it will fall off after a long time, so furniture with this defect must not be bought.
As long as these are achieved, it is a good furniture that is qualified.
-
Anonymous users2024-01-23The wood has no cracked scars, no loose joints, and no roughness on the surface.
-
Anonymous users2024-01-221. Match the color of the design drawing size.
2 Meets functional requirements.
3. Process quality requirements.
4 Consider packaging logistics.
There are two technological approaches to the customization of solid wood furniture. One is to use the cabinet and door panel to make a whole set of furniture with pure solid wood, which is called pure solid wood custom furniture, also known as log custom furniture; The other is the practice of using pure solid wood for the door panel and multi-layer solid wood for the cabinet. >>>More
The higher the air temperature, the more water it contains in the saturated state, which means that the humidity inside the house is higher than outside in winter. At this time, opening the window for ventilation will only bring in the cold air from the outside, making the room drier. The humidity of the room is controlled at about 50%, which is more beneficial for the maintenance of furniture. >>>More
Solid wood furniture factory only sewage purifier and central vacuum cleaning equipment for environmental protection, the others are only related to safety, but 90% of the domestic furniture factories are without these two kinds of equipment, especially the first kind of sewage treatment, I have not heard of which factory has, the second kind of central vacuum is only large furniture factories, such as the size of the staff in the level of 1,000 people will be configured. If you want to ask about the environmental protection of furniture, then it is paint and adhesive, you see what brand of paint and what brand of adhesive is used by furniture companies, only these two products have an impact on whether the cost of furniture is environmentally friendly.
Buy furniture online, it is recommended that you buy cheap panel furniture, anyway, the price is low, no matter how bad things are, they are not bad, as long as they can be used, the cost performance will not be too bad. Even if something goes wrong, the money is not much, so it doesn't matter.
One of the keys to high-quality Burmese mahogany furniture is logs, wood has both sapwood and core materials, the cross-section of a log is all out, it can be clearly seen, the outer white is the sapwood, the inner core brown is the core material, and the sapwood is very moth-eaten, is unusable, can only be used as firewood. >>>More