-
Anonymous users2024-01-24It's almost OK, there are several screws on it that can be corrected, and the space can still be selected, as long as it is not directly attached to the edge of the plate, and the upper and lower loads are probably suitable and uniform.
Generally, there are two hinges, and the upper and lower thirds are OK. It is best to install the screws in place at one time.
Nothing else!
Open the drawer and smell it if it is pungent, and if there is, it is not environmentally friendly. >>>More
The edge banding of panel furniture is not important, pay attention to the advantages and disadvantages of edge banding materials, pay attention to the phenomenon of edge banding is not smooth, and pay special attention to the phenomenon of edge banding on all six sides - although the formaldehyde adhesive is used to make the board production process or less volatile gas edge banding, the environmental protection of the living room depends on the firmness of the furniture structure, the gap between the cracks of the furniture door and the drawer shows that the workmanship is rough and deformed; Second, the single box double box through the outer surface of the outer furniture should be laminated with the board, called double box, double box furniture, both beautiful and strong, hardware use at will, the advantages of the combination of panel furniture, the quality of the connecting parts is bad, the quality of the whole furniture is closely related, imported furniture is expensive, some details, particleboard and MDFLook at the density of the material used in the hinge groove and the particleboard in the hole, carefully observe the bare internal structure of the hinge groove and the hole, and see the density of the particleboard.
No. If the screw hole is damaged. You can find a small wooden stick and cut it with a knife to be larger than the hole, and then rub it with glue and punch it in to fix it with ordinary screws.
Panel furniture is divided into assembly and disassembly, the whole assembly can not be disassembled, at most is to remove the foot and drawer, door panel, the basic components of disassembly and assembly can be disassembled, panel furniture generally has the corresponding disassembly tools, such as Phillips screwdriver, wrench,. >>>More
You'll have to look at the drawings. The main thing is to find the board by the drawing. Today's panel furniture is all fastener structure. >>>More