-
Anonymous users2024-01-24Generally, the wash basin is used as a dry area, and the shower room and toilet are used as a wet area.
-
Anonymous users2024-01-23Wet and dry zoning is generally a term used throughout the floor plan.
The dry and wet zones in the bathroom generally refer to the fact that the shower or bath is set to be wet and the rest of the rooms are set to dry.
The bathroom is definitely the top priority of a decoration, and I personally must be a little more demanding on the decoration of the bathroom than other aspects, because I think that whether a home is clean, tidy and comfortable, the bathroom is a very important measure. >>>More
1. Dry and wet partitioning is to separate the washing, convenience and shower functions of the bathroom, overcome the defects caused by cross-water use in the past, and reduce the overflow of the toilet wall and floor. In the past, washing and showering water splashed everywhere, and the water vapor was very heavy after bathing, so it was necessary to wipe and clean frequently to avoid the growth of bacteria due to moisture. Reasonably separate washing and "convenience" so that the two do not interfere with each other. >>>More
You can push the bathroom to the small balcony, anyway, the chances of taking a shower and using the kitchen are not too large, and the original place where the sink was put is a storage cabinet or washing machine.
It's best to install them, it's easy to get water on the ground in the bathroom, it's much more convenient to have a floor drain, and my home is also dry and wet separated, just finished decorating and moving in.
Install a piece of glass, if you don't want to use a transparent one, just buy a decal on the glass.