Taurus integrated ceiling light is not lit

Generally, it is a drive problem, and it is okay to change the driver, and the LED light strip inside is rarely broken.

Check the power cord, if the power cord is on fire, it may be a short circuit somewhere. >>>More

If it is a square aluminum gusset, it is very simple, use a chuāizi (chuāizi) through the sewer to suck the center of the ceiling lamp near the gusset, and pull it down to remove the gusset, if there is still one side of the board stuck in the crack of the keel, reach in and press it down, in short, to remove the adjacent gusset. Next, reach in, press down the two sides of the ceiling lamp gusset that are clamped by the keel, and you can remove the gusset of the ceiling lamp, and then buckle it up as it is after changing the lamp.

Hello, the general ceiling uses LED lights, and the LED lights are most likely to burn out is the IC ballast, you can open the ceiling and check the ballast inside. After the renovation of my own home, several lights were broken and were all ballast problems, and I bought them back from the Internet and never broke them again after I hit them.

Installation Tools:

Percussion drills, toothless saws, rulers, drop wires, screwdrivers, booms, etc. >>>More