How to avoid leakage in the kitchen and bathroom floors

Updated on Kitchen 2024-07-13
8 answers
  1. Anonymous users2024-01-24

    Do a good job of waterproofing when decorating. Strictly control the quality of the project.

  2. Anonymous users2024-01-23

    There is no way to prevent it, but to do a good job of waterproofing the ground.

  3. Anonymous users2024-01-22

    When decorating, waterproofing must be professional, and good workers must be found to do waterproofing.

    Waterproofing is very important in the early stage.

    Then there must be no gaps when the floor is tiled, and it is tightly combined. In this way, it is more safe to leak water and will not penetrate. The floor drain must be selected well, and the market is dredged.

  4. Anonymous users2024-01-21

    1. Before waterproof construction, control the flatness of the base layer;

    2. During waterproof construction, control the air cleaning in the operation area;

    3. After the waterproof construction, the impermeability of the construction site should be tested for water storage;

    Attention should be paid to the treatment of the root of the wall and plate pipes;

    4. Strengthen the protection of finished products after the completion of waterproof construction.

  5. Anonymous users2024-01-20

    When decorating, ask the cement worker to buy a glue called the leak repair king, which is very good!! Absolutely.

  6. Anonymous users2024-01-19

    Try not to damage the original waterproof layer; Resurfacing floor tiles should be done to make the ground waterproof; Be sure to do wall waterproofing; The grooves of the water pipes in the wall should also be waterproofed; It is waterproof with 24-hour "water storage test" acceptance.

  7. Anonymous users2024-01-18

    Before moving in, see whether it is a rough house or tiled, the former is best to do waterproof treatment, especially around the sewer pipe, be sure to ask a good master, carefully painted with well-known waterproof paint; The latter requires a bit of effort, the tiles are up, and a method is used before the case. Hope my advice is useful to you.

  8. Anonymous users2024-01-17

    When decorating, you can do waterproofing again.

Related questions
6 answers2024-07-13

If the water pipe in the wall is leaking, you can only open the wall or ground to replace the water pipe, if it is your home floor to the downstairs water seepage, then do waterproofing, paint the ground or wall with waterproof paint, and then paste tiles or floor tiles, you can also hit the cement floor, so that there will be no more leakage.

4 answers2024-07-13

1. Find the leakage point and where the water comes from. Otherwise, you block one point, and the second point leaks.

1 answers2024-07-13

In the case of cracks and water leakage on the floor of the toilet room, different treatment methods should be adopted depending on the size of the cracks. Generally, the surface layer is removed locally along the crack, exposing the crack part of the waterproof layer, if the crack is wider, the width and depth of the crack are not less than 10mm of the trench, after removing the floating ash debris, the sealing material is embedded in the trench, and then the coating film waterproof layer with carcass reinforcement material is laid and the original waterproof layer is overlapped and sealed, and the surface layer is repaired after testing the water without leakage. If the crack is fine, the ground surface layer can be removed without shoveling, and after cleaning the crack surface, a certain width of synthetic polymer coating film similar to the color of the ground can be applied along the crack.

5 answers2024-07-13

There's no good way. You can only lift the floor tiles in the leaking place, and then re-pave them after the leakage is solved. That's one way. Hope it helps!

4 answers2024-07-13

Because it is not ventilated, such a toilet is also more humid and prone to bacterial growth. >>>More