-
Anonymous users2024-01-24If the original floor of your home has been paved with terrazzo, then your floor is relatively flat and there is no problem without keel installation.
Now the floor is deformed, it can be a problem with the quality of the floor (dehydration rate), or it can be a problem with the temperature and humidity in your room.
Find a floor repairman (available in the upholstery market) and let him see what the problem is, and then find a business, so that you can reason with him.
-
Anonymous users2024-01-23According to the general solution of engineering disputes, if there are design drawings, the design problem is responsible for the design, and the construction party is responsible for the construction problem. When you consulted the merchant, he only gave advice, and the decision on whether to adopt it is up to you. But you can't complain about it.
The wooden floor is greatly affected by humidity, and the ventilation requirements are relatively high, and now this situation has to be re-done at your own expense.
As for the discount of half of the service life, this is a bit unclear, but the damp deformed plate to restore the original shape to find a way to solve.
-
Anonymous users2024-01-22Looking for a business, solid wood can be installed twice, without much impact.
Just be careful not to finish the surface when dismantling
-
Anonymous users2024-01-21This method is very clever, leaving people to solve the problem, that is, only after solving the problem can they leave, and the public security department has nothing to do.
-
Anonymous users2024-01-20This kind of thing must be the sole responsibility of the merchant, there is no good solution, can only be dismantled and reinstalled, if the merchant ignores it, it is recommended that you call 12315 directly to complain! By the way, it is recommended that you choose the solid wood flooring of the composite region when choosing a floor
-
Anonymous users2024-01-19Solid wood flooring is theoretically to hit the wood square, but if the ground is flat, it is not needed In addition, the solid wood floor itself is unstable You can find the manufacturer to let him repave If not, find the market If it doesn't work, find a consumer association, but I don't think it will have any effect If you want to solve it yourself, find a carpenter to reinstall it The installation cost of solid wood flooring is about 10 yuan.
-
Anonymous users2024-01-18You don't need to hit the keel on the solid wood dragon and phoenix lock floor that you pave Shenghe, and there will never be this kind of problem, and the flat solid wood floor has to hit the keel, and if there is a problem, find a merchant.
-
Anonymous users2024-01-17If the consumer has been informed. If the consumer agrees, he can only say that he can negotiate to re-pavement...
Don't dwell on anyone's reasons yet. Let's ask for a repair on the grounds of installation problems.
-
Anonymous users2024-01-16Which manufacturer's goods?
What about common sense?
Solid wood floors must be keeled and leveled on the keel.
Halo which manufacturer is there is no common sense at all.
Find a consumer association or a manufacturer.
Generally, dealers have branches of manufacturers above to manage them.
-
Anonymous users2024-01-15The landlord should pay attention not to find a small factory in the future, I suspect that there is a problem with the quality, and the inferior goods are used. Pay attention to harmful gases such as formaldehyde, ammonia, etc.
1. Disperse deformation stress: because the solid wood floor is a wood object arranged in the single fiber direction, which is very easy to deform, so the laying direction of the solid wood floor and the laying direction of the keel should be perpendicular when laying, and the purpose is to stagger the constraint to disperse the expansion and contraction stress of the solid wood floor. >>>More
It is best not to use woodworking boards, because after a long time, the wood in the woodworking board will also be loosened, and the best is to use a good multi-layer board with the same thickness of the multi-layer board, the quality and safety performance is much stronger than that of the blockboard, and according to the actual situation of your home, there is no need for keel, directly lay solid wood floor.
Solid wood flooring has its own advantages and disadvantages of hitting keel, solid wood flooring keel first of all the ground is uneven, waste the floor ground is not easy to level, and then increase the height of the floor, and then hit the keel must use floor nails to fix the solid wood floor. But the good thing is that the floor is fixed. Solid wood flooring does not play keel, it is easier to become popular recently, especially after the solid wood floor is processed with a lock, and the composite floor is the same as the one that can increase its firmness without using any nails to destroy what floor, and the ground is relatively flat, the disadvantage is that the price of the floor with a lock is slightly higher.
At present, there are three kinds of "wood" floors used in decoration: 1. Solid wood floors are made of all logs, no bonding, splicing, just surface painting, natural decorations, non-toxic and pollution-free, high price, laying needs to play keel, comfortable feet. However, the solid wood floor cannot be used for geothermal heating, because the nails that fix the keel first will damage the geothermal pipes
Jinan Decoration Company.
Remind you that laying a solid wood floor is to make a keel, if you don't hit the floor, it is easy to deform. There are also merchants who say that their floors can be covered with film, and I feel unreliable. >>>More