-
Anonymous users2024-01-24Furniture rust is for steel, iron office furniture, once found that a part of the office furniture is rusty, you can use a small amount of sewing machine oil to wipe the rust clean, and then use fine water sandpaper to wipe off the rust, and finally use a ratio of 2:3 to mix the paint and turpentine, evenly coated on the rust.
Apply a layer of wood glue sold in stationery stores to the rusty area, and tear off the glue after drying (half to one hour) to remove more than 90% of the rust. Long-term maintenance is naturally to keep it dry!
Can't you unscrew it? If you can't unscrew it, you can go to the hardware store to buy a universal anti-rust lubricant, spray it a few times, and the rust spots of the screws will fall off, which is very easy to use, and you can remove rust and unscrew the screws.
Carefully sand with fine sandpaper, then wipe it off with a rag dipped in gasoline, reapply the paint, and you're done.
The door panel is related to the face of the entire inner door, and a neat and bright door panel will make the inner door of the home look vibrant. For the daily cleaning of the door panels, you can use a soft, dry cotton cloth or silk to wipe down. Wiping the surface with a hard or hard-containing medium (e.g., dusty with it) may scratch the surface; If there are serious stains on the door panel of the interior door, you can use a neutral cleaner or a special furniture cleaner to clean the stain before dry wiping. >>>More
Please clean with stainless steel wool balls.