-
Anonymous users2024-01-24This can only determine if there is a leak between your inlet and return, and at what stage the leak needs to be further checked.
The circuit is connected incorrectly, it is recommended to find your decorator to reconnect it.
Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used. >>>More
If the empty opening does not have a leakage warranty, then the possibility of short-circuit fault of the electric water heater is relatively large, and if the empty opening is leaked with a leakage warranty, the possibility of leakage of the electric water heater cannot be ruled out, and a comprehensive detection and analysis is required to eliminate the fault.
First of all, it is necessary to determine whether it is overload tripping or leakage tripping, it is said that 32 An is not small, and the brake can not be changed blindly. Should first ask the electrician to use the shake meter to measure the insulation of the line and electrical appliances, if not up to standard, update the circuit or electrical appliances is the root cause, you can also change a leakage insurance first, to eliminate the possibility of leakage and misoperation.
The electrician did not install the line according to the correct line when the line was installed, and the correct way was to have a water heater and a lighting line to another route, which would not cause the lights to dim in the situation you said.