What should I pay attention to when doing toilet waterproofing? Thank you, God helped

1. The bathroom floor is leveled first. If you're replacing the floor tiles in the bathroom, be sure to level the floor with cement mortar before waterproofing it after chiseling off the original tiles. This avoids leakage of the waterproofing coating due to uneven thickness.

2. The seams should be painted in place. The joints between the walls and floors of the bathroom and the joints between the water and water pipes and the floor are the most problematic areas. In the construction, you must urge the workers to deal with these corners and corners, and all waterproof coatings must be applied "in place".

3. Wall treatment is also very important. In the general toilet waterproofing treatment, the wall should also be made about 30 cm high waterproof paint to prevent water from penetrating the wall. However, if the wall of the bathroom is a non-load-bearing lightweight wall, the entire wall should be coated with waterproof paint.

If you have a two-fan shower screen in your home, the two walls that are connected to each other should also be fully painted. If you use a bathtub in your home, the wall adjacent to the bathtub should also have a higher height of the waterproof paint than the top edge of the bathtub. 4. The waterproof test must be done.

After the construction of the toilet is completed, all the sewer in the toilet is blocked, and a 25 cm high "barrier" is built at the door, and then 20 cm high water is poured into the bathroom. After 24 hours, you will check the surrounding walls and floors for leaks. This 24-hour waterproof experiment is the key to ensuring the quality of the toilet waterproofing project, and you must do it.

5. Keep the water smooth. All sewer pipes in the bathroom, including floor drains, plumbing pipes for sanitary ware, etc., should be kept unobstructed. Only in this way can we fundamentally avoid the tragedy of the "flooding of the Seventh Army."

First you need to determine what is causing your toilet to leak:

1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to repair the pipeline in time to solve the water leakage problem;

2. If there is no problem with the pipeline, then consider that the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to do the waterproofing again, so as to fundamentally solve the problem.

Bathroom waterproofing, it is recommended to use mortar waterproofing agent, not only with the base surface of the bond firm, but also puncture resistance, high strength, waterproof years can be with the same life as the building, is now home decoration waterproof rental commonly used in a waterproof material.

Waterproofing is a very important concealed project, no matter from the selection of materials or construction, all need to be in strict accordance with the standard, only the right waterproof material plus the standard construction, so as to achieve the waterproof effect once and for all!