-
Anonymous users2024-01-24The bathroom is waterproof, what should be paid attention to is that the bathroom is waterproof, and it must be done thoroughly, otherwise there will be problems.
-
Anonymous users2024-01-23Notes:
1. In the process of stirring plain mortar or mortar, no water or other liquids shall be added.
2. Suitable for ordinary Portland cement of grade or higher grade, the mud content of sand should be less than 3, and the water content should be less than 15.
3. The waterproof mortar should be compacted flat, there should be no hollow drum cracks, floor drains, pipes, the roots of sanitary ware, and the chiseled ditch for laying hot and cold water pipes should be the key waterproof construction parts, which should be done carefully, and the yin and yang angles should be made into r angles.
4. The height of the bathroom wall is not less than meters. The height of the kitchen wall is not less than meters.
5. The curing time may change due to the influence of external factors.
-
Anonymous users2024-01-22Bathroom waterproofing, first of all, you need to choose the right waterproof material, the bathroom is a more stable part of the house structure, so it is recommended to do waterproofing can directly use mortar waterproofing agent, not only with the base surface of the bond firmly, but also puncture resistance, high strength, waterproof years can be the same life as the building, is now home decoration waterproofing used in the more common materials.
In addition to the selection of good waterproof materials, standard construction is equally important, only good products coupled with standard construction can ensure good waterproof effect.
In the sunken bathroom, it is necessary to do waterproofing once in the backfill pit, and then it needs to be waterproofed again after backfilling and leveling.
After each waterproofing of the bathroom, it is necessary to do a closed water test to check whether there is any leakage in the waterproof construction and whether the waterproof function is normal.
-
Anonymous users2024-01-21The most basic thing is to keep the ground clean, and then paint it waterproof, remember to wait until it is dry, and then paint it a second time.
-
Anonymous users2024-01-20Bathroom waterproofing to pay attention to.
1. The bathroom floor is leveled first. If you're replacing the floor tiles in the bathroom, be sure to level the floor with cement mortar before waterproofing it after chiseling off the original tiles. This avoids leakage of the waterproofing coating due to uneven thickness. >>>More
Regarding the waterproofing of the bathroom, I can give you the following suggestions:: >>>More
1. Bathroom waterproof construction steps.
Step 1: You can use slightly coarser cement as a primer first, and wait for the cement to dry before brushing the waterproof coating. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More
Generally speaking, the materials should be strictly controlled, which can greatly avoid workers from buying fake materials to shoddy and cutting corners. General bathroom waterproofing, it is recommended to use mortar waterproofing agent, simple construction, high strength, puncture resistance cost performance is also very high, is now a more commonly used material in home decoration. As for the precautions, it is necessary to pay attention to the thickness and height of the coating during the construction of the worker, whether the coating is uniform, whether the closed water test is done in time, and so on. >>>More
Yes, you have to wait for it to dry before doing it, and the surface should also be cleaned, remember that the shower room is waterproof at least meters.