There is a router in the living room, and now there are 3 ports, and 1 network cable in each room

Updated on Living room 2024-07-12
4 answers
  1. Anonymous users2024-01-24

    If you can, you can add a small switch to the room.

    Or you can use one network cable to make two heads.

  2. Anonymous users2024-01-23

    Replace the router with a wireless router and then equip a wireless network card for a computer without a network cable, which is about 100 yuan in total, which is economical.

  3. Anonymous users2024-01-22

    In many places, you can buy the kind of multi-jack router, you can go to various stores and ask, and tell the shopkeeper that you want the kind of thing that allows two computers to access the Internet with one network cable. The shopkeeper can understand.

  4. Anonymous users2024-01-21

    Buy an ordinary router and connect it to the network cable in this room, and you can set it up to access the Internet on two computers. The router is not expensive, thirty or forty yuan a piece.

Related questions
1 answers2024-07-12

Router problems, a little blocking the signal will be attenuated greatly. It is recommended to replace the router of the first-tier manufacturer.

1 answers2024-07-12

The cat you are talking about is a routing cat, but the routing function is disabled, so he can be considered a multi-port cat You need to use a notebook to connect with the cat, you must use dial-up Internet access to access the Internet Notebook and cat LAN port (note: do not connect to the iTV port) After connecting, you can access the Internet by establishing a broadband connection in the computer, WIN7 The lower right corner of the computer or signal icon - left click - open the network and sharing center - more network settings first item - set up a new connection or network - next step and then fill in the relevant information Internet password is the broadband account number in your router, key, after filling in, the network adapter settings There is a broadband connection inside, right click - enable (connect) enter the password is OK After connecting once, you don't need to enter the password later.

2 answers2024-07-12

Wired cascade method:

1. The main router does not need to be moved. >>>More

4 answers2024-07-12

1. Reset the settings of the wireless router first.

2. Set the debugging computer to automatically obtain the IP address. >>>More

1 answers2024-07-12

You don't need a splitter to add a router, and you can access the WAN port of the bedroom router through the router LAN port in the living room, and you can connect the Internet to two computers.