Can you use hot water in the kitchen with a large water heater in the bathroom

Updated on Bathroom 2024-07-20
3 answers
  1. Anonymous users2024-01-24

    Hello! First of all, make sure that there is a hot water pipe from the bathroom to the kitchen, if it is leading, see if the pipeline is very long, whether there is a valve in the middle is closed, if it is long, you can release hot water when you wait for a long time when you use water in the kitchen, I hope it can help you.

  2. Anonymous users2024-01-23

    You can use water, if it is too far away, you can also install a small kitchen treasure in the kitchen, and it is very practical to wash dishes and wash hands.

  3. Anonymous users2024-01-22

    It can be used! It is necessary to put a little more cold water every time you use it, because the water pipeline is very long.

Related questions
2 answers2024-07-20

1. It may be that your pipe connection is wrong, or the switch valve of your bathroom hot water pipe is not opened! 2. The hot water pipe in your bathroom is blocked.

3 answers2024-07-20

Upstairs is a reason, or it could be that the indoor pipes are connected incorrectly, you can try it by switching the tap water on and off.

3 answers2024-07-20

Re-slotted the power supply line on the wall in the bathroom to install a waterproof power socket in a suitable position, or use a reliable power cord to extend the power supply line of the electric heater, and draw electricity from the power socket in other places. >>>More

5 answers2024-07-20

1 all according to what you said, the size of the bathroom is OK, 900 * 900 space can be used open, the installation of the electric water heater is convenient, that is, there are two hanging slots on the back of the water heater, and two pendants are fixed with expansion bolts on the wall, and it is very reliable. It is also easy to disassemble when moving, as long as the water is removed, one person can move it. >>>More

3 answers2024-07-20

The distance between the kitchen and bathroom and the water heater is too far, the pipe is too long, and part of the nozzle is sealed when the raw material belt is wrapped in the joint, elbow, etc., resulting in poor water flow.