Why are some masters not willing to use the wall to press the floor?

Bathroom decoration will often consider tiling, tiles are pasted, beautiful and easy to take care of. But sticking tiles is a drop of exquisiteness. Be sure to stick the floor tiles first, press the floor with the wall, this is because the kitchen belongs to a more humid space, first paste the floor tiles and then press the floor tiles with the wall tiles, which can avoid the emergence of problems such as water flowing out with the gaps in the floor tiles and breeding bacteria.

>Therefore, the most standardized way to decorate the bathroom with tiles is "wall tiles and floor tiles".That is, the bottom row of tiles of the wall tiles should be pasted after the floor tiles are pasted, and the final paving effect is that the wall tiles press the floor tiles instead of the floor tiles press the wall tiles. The benefits will be obvious, not only will there be no seams, it will look good visually, and the joints are glazed tiles, and the waterproofness is good, but the fly in the ointment is that the requirements for mechanics will be very high.

> but it is not difficult to have high requirements, for this process can be divided into three steps: 1, in the wall around the arbitrary elevation of the bomb to measure the horizontal line of the mountain, before you can start to paste the wall tiles, but you have to control the order of the bricks, so as not to cause more times to cut the bricks to improve the effect, but also beautiful. 2. Pave the floor tiles after pasting the wall tiles, control the drainage slope, do not pay attention to the backflow of the toilet water (flow to the door) and pay attention to the protection of waterproofing, and carry out the water off test after pasting to ensure that there is no leakage.

3. Cleaning, steel wool balls can be used for wall cleaning.

> the whole process is still cumbersome, so when decorating the bathroom, when it comes to the method of pressing the floor with the wall of the bathroom porcelain tilesThe workers are not blind and happy, which not only increases the difficulty, but also prolongs the working hours, and cannot increase the wages. In the case that the owner doesn't understand very well, most of them won't ask for trouble.

Hope mine is useful to you, hope.

The master said that if you want the tile to be paved more firmly, you need to pay attention to the grassroots problem. Because the bathroom wall will be waterproof before tiling. Therefore, when inlaying, it is necessary to do a brushing of the base layer, and tile adhesive can be used to paste it if necessary.

This will avoid the problem of falling off due to the over-smoothing of the base layer.

Because it's not durable, and it's not good for the house.

Bathroom decoration tiles, first paste floor tiles, kitchen belongs to a more humid space, first paste the floor tiles and then use wall tiles to press the floor tiles, to avoid water flowing out with the gaps in the floor tiles, breeding bacteria and other problems.

Generally speaking, according to the normal paving steps, this process is the same as the ground pressure wall, and the wall tiles must be laid first. But the difference is that the bottom layer of tiles on the wall should be reserved, and the second row of tiles should be inlaid from the beginning.

Perhaps for some friends with less decoration experience, this construction process is not clear. In fact, to put it simply, there are generally two construction methods for kitchen and bathroom tiles. One is to press the wall tiles with floor tiles, and the other is to press the floor tiles with wall tiles.

The paving method of ground pressure wall is actually to lay the wall tiles first and then lay the floor tiles. This will cause a certain gap to form between the wall tiles and the floor tiles. And when we take a shower in the future, if the wall is accidentally splashed with water stains, then the water will flow through the wall into this gap.

Over time, it is easy to breed dust and germs.

Because this will be harmful to the floor, it is easy to leak.

This paving method is the opposite of a floor-pressed wall, where the wall tiles fall on top of the floor tiles. So it is not easy to damage the waterproof layer. Moreover, the gap is relatively small, and it is not easy for stagnant water to flow under the tile.

However, due to this paving method, its process is relatively complex, which tests the master's craftsmanship and consumes construction time.

This paving method wall tiles will fall directly on the waterproof layer, if the waterproof layer appears to age in the later stage, then this place is prone to leakage due to the pressure of the wall tiles.

Mainly considering the problem of later stage, this place is prone to leakage due to the pressure of wall tiles.