-
Anonymous users2024-01-24My dad was a decorator. According to personal understanding, your problem.
Now let's not consider the priority of the bricklayer mason.
First of all, the wall after the wall tiles must be much more protruding than the original wall. The ceiling of the bathroom is generally made of gusset, and there are slots around the ceiling that are used to make gussets, which can also increase the appearance. If you snap the gusset first, the four sides of those gusset will definitely hide in the wall.
It affects the appearance and increases the difficulty and workload of pasting the top batch of wall tiles. Cutting wall tiles is also something that people are reluctant to do. If the height of the ceiling is already fixed, how do you make sure that the wall tiles are cut no more or less?
The answer is cutting! And it's a thankless task!
Therefore, in the decoration, it is still the wall tiles first and then the ceiling.
I have limited ability to express myself, I hope you can understand!
-
Anonymous users2024-01-23In fact, there is no need to cover it all up, find the lowest point of the sewer pipe in your house. Then the wall tiles are a few centimeters higher than that position, and it is OK.
After all, although it is an eternal truth, it is also the experiment of the predecessors!
I'll explain.
First of all, when it comes to the problem of this level, if the top is a little slanted, then it will also lead to poor tiles.
Second, according to what you said about the ceiling first and then the bricks, then the result is that the tiles completely cover the corners of the original ceiling. And there will definitely be an unsightly gap between the wall tiles and the top gusset.
Third, since it is said that the bricklayer is finished, and the carpenter enters the site, is it necessary to call the bricklayer when the carpenter is done again? A production line that was originally very flowing was destroyed in this way.
Not only is it not beautiful, but it is also cumbersome, and the most important thing is that I am afraid that I will not be able to pay you a difference.
So you're just going to have nothing to do with yourself! But encourage that intellectual curiosity!
-
Anonymous users2024-01-22It is invisible, but there is a part of the truth upstairs, if you want to save it, if you say that you have a ceiling type of two meters four, the general corner is about three centimeters, then you will paste the brick to two meters four three, if you even think three centimeters is a waste, then there is no way, the tile must be flat, if you say the ceiling first, how to deal with the unevenness of the wall, so you have to use the tile to take advantage of the flat and then do the next step.
-
Anonymous users2024-01-21You can also hang the ceiling first and put it on the bricks.
As long as you have enough time, you are not afraid of trouble.
Actually, it's all the same.
Because bricklayers enter the construction site before carpentry.
The bricklayer finished his own business, and the carpenter did it at the door.
-
Anonymous users2024-01-20Generally, it is higher, so that it looks good after hanging.
As for what to do first, it's all in the order of construction, and there is a certain amount of truth.
-
Anonymous users2024-01-19Now let's not consider the priority of the bricklayer mason.
First of all, the wall after the wall tiles must be much more protruding than the original wall. The ceiling of the bathroom is generally made of gusset, and there are slots around the ceiling that are used to make gussets, which can also increase the appearance. If you snap the gusset first, the four sides of those gusset will definitely hide in the wall.
It affects the appearance and increases the difficulty and workload of pasting the top batch of wall tiles. Cutting wall tiles is also something that people are reluctant to do. If the height of the ceiling is already fixed, how do you make sure that the wall tiles are cut no more or less?
The answer is cutting! And it's a thankless task!
Therefore, in the decoration, it is still the wall tiles first and then the ceiling.
I have limited ability to express myself, I hope you can understand!
Of course, press the bathtub first, otherwise it will be easy to damage the tiles on the floor and wall during the installation of the bathtub. For example, the tiles will startle, or rub dirty.
The purpose of pouring concrete under the bathroom wall is to prevent the water in the bathroom from penetrating out more effectively. >>>More
Generally, as long as the material quality and installation of the water pipeline are checked, there will be no major problems, of course, if you are not at ease, you can consider adding a waterproof coating around it, which can be more moisture-proof and water-seepage.
After the house is decorated, the purchase of furniture is indispensable, many people do not know how to choose when choosing furniture, what kind of furniture should be purchased, how to place it after buying, these have become problems, let's take a look at the method of furniture selection, the principle of selection. >>>More
New furniture will smell too! Some will be accompanied by volatilization of harmful gases! After the furniture is set in the decoration, first, you can reasonably use the overall method to reduce the time to live in the new home, that is, the renovated house and the new furniture together to quietly volatilize harmful gases! >>>More