The main switch is 63A circuit breaker, the single pole leakage for air conditioning is 32A, and the

Probably not, first of all, do you only have one air conditioner in your house? And are you only going to use a leakage protector for the kitchen? Normally, in addition to lighting, other grounding are all subject to leakage protectors, and your total opening is too big, not the bigger the better.

To give you a suggestion, the electrical box is arranged from left to right, 1: the main switch 2*40 is open, 2: the lighting is 1*16 empty, 3:

2*32 leakage protector, 4:Ordinary socket 1*16 empty open, 5: kitchen 1*20 empty open, 6:

Air conditioner 1*20 air on, 7: water heater 1*20 air on. In this way, you will get a 15-digit electric box (total open 2 + lighting 1 + leakage protection 4 + general plug 1 + kitchen 1 + air conditioner 1 + water heater 1 = 11 digits, more than one air conditioner).

Personal advice, it depends on how big the house is and how many appliances are used.

Yes, press how much is good, but then because people are used to using whole numbers to plan electricity consumption. However, due to the voltage output itself, there is an error, for example: 220 3=>380V, and there must be an error in the voltage output due to the accuracy of the equipment.

Therefore, when designing electrical protection, there is a slight margin of 5%-7%, and you still use it according to the integer value when actually using.

There are two schemes: the first (standard general) lighting and socket separation, choose 2p40A leakage as the socket total opening (4 digits)! Choose 2p16A air opening for lighting total opening (2 positions)!

Kitchen 1p32A empty open (1 person)! Restroom 1P16A (one person)! Air conditioner 1p16A air open (several air conditioners are installed with a few air open,) ordinary socket 1p25A air open (1 person)!

The main power supply of this scheme enters the socket total on, and the lighting power supply is taken from the inlet end of the socket total open! The second plan: choose 2P63A empty open for total opening (2 digits)!

Lighting 1P16A (1 bit)! Normal socket 2P25A leakage (2 positions)! Kitchen 2P32A leakage (two people)!

Bathroom 2p16A leakage (2 people)! Air conditioner 2P16A leakage (several air conditioners and several leaks)! This scheme lighting and sockets are a total on、It is not advisable to consider from the point of view of scientific electricity!

The first place is more! The second light and socket are on in one total on、Interfere with each other!

The total open is to be leakage protection. It should be equipped with a 6-digit distribution box. Toilet sockets should be separated.