-
Anonymous users2024-01-24This is generally used in squatting pits in public places, depending on the valve, and has nothing to do with the toilet, this valve is called a "manual flushometer".
This indicates that the drain fittings in the toilet are not well adjusted, and it does not necessarily mean that it is an inferior toilet. The adjustment is very simple, you open the toilet tank lid, find the small adjustment cup of the drain valve, and pull it up a little bit.
General smart toilet function.
It can be what you call washing >>>More
After flushing, the water level is caused by the slow fall of the cover that closes the opening in the water tank, after pressing the button, the cover is opened, the water is left, the water tank water flows out, the cover will be slowly closed, at this time, the remaining water is still left, to adjust the slider of the height of the cover to be lowered, in addition, on the cover surface, add a lead block or tie a point of steel wire, in order to speed up the speed of the fall of the cover.
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.
At present, the "Standard for 6-liter Water Toilet Supporting System" issued by the National Standardization Committee is a national mandatory standard, which requires that the water consumption of the product for stool flushing is not more than 6 liters per flushing cycle. >>>More