-
Anonymous users2024-01-24Toilet waterproof construction to be before decoration, if it is a later leakage, and can not find the location, it is necessary to clean the entire ground and wall from the bottom to the top of 30 cm to the surface of the building structure, that is, the wall to get rid of the ceramic tiles and cement sand ash on the surface, the ground to get rid of the tiles and sand ash, clean up, use Sika or other brands of waterproof materials to smear, several times, after drying again, and finally make cement sand ash cushion and floor tiles, the same wall, pay attention to the construction of waterproof materials to be done at one time, Don't stop in the middle, because the toilet area is not large, the amount of one time is not very large, and the waterproof middle stop, it is easy to leak stubble.
If you can determine the location of the water leakage, such as the floor drain, the sewer nozzle, etc., you can partially open the ground and use waterproof materials, or waterproof materials such as waterproof. The recovery method is the same as above.
-
Anonymous users2024-01-23What's missing? It may be necessary to knock down the floor tiles and plane the floor.
Hello, Apple Decoration will answer the toilet waterproof construction process for you:
It can be made of waterproof polypropylene, the bottom is all done, the wall can be made of meters high, and the closed water test is done well, and the bricks are paved without water seepage.
Decoration must not only care about the shape, the good-looking skin is very simple, and the quality of construction is the last word, such as the waterproofing of the bathroom, the top priority. >>>More
The solutions to a leaky toilet are as follows: >>>More
1. Dismantle the old wall and floor tiles.
2. Repaint. >>>More