If the bathroom is leaking, can it be waterproofed directly on the surface of the tile?

Bathroom leaks can be waterproofed directly on the surface of the tiles. If the filling of the tile gap is incomplete, fill it with Merrill Lynch porcelain glue, and then use a stone tile waterproof guard to do waterproofing.

It is not possible to do waterproofing on the surface of the tile, and it is okay to redo the joint.

For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).

If the bathroom is leaking, can it be waterproofed directly on the surface of the tile?No.

If the bathroom is leaking, you can directly do waterproofing on the surface of the tile, prepare 20 catties of tap water, and pour the waterproof fine seam agent into the bucket, and the specific operation steps are as follows:

1. Prepare 20 catties of tap water.

>2. Pour waterproof fine seam agent into the bucket.

>3. Stir the waterproof fine seam agent with the water in the bucket evenly.

>4. After stirring well, pour the liquid on the bathroom floor.

>5. Use a broom.

Sweep the adjusted waterproof seam to every corner of the bathroom.

>6. After waiting for an hour, use a shovel to shovel up the solidified waterproof fine seam agent.

>7. Clean up the solidified waterproof seam agent.

>8. The waterproof fine joint agent penetrates into the gap of the tile and solidifies after mixing with the sediment, which will play the role of waterproofing, and the operation is completed.

Leakage in the bathroom, we generally don't want to remove the tiles to redo the waterproofing, so what measures can be taken?

Treat the roots of restroom pipes as well as walls.

First of all, the root of the pipe and the root of the wall in the bathroom should be cleaned and kept dry.

For particularly small gaps, it is personally recommended to apply glass glue directly. For example, the root of the toilet drain pipe and the part of the toilet that comes into contact with the floor can be sealed with glass glue. In the same way, the circumference of the floor drain can also be sealed with glass tape.

The roots of the wall can also be sealed with glass glue.

Let the glass glue solidify naturally before testing the water. Generally speaking, wait until a day or so before you can test the water again. At this time, you can basically determine whether this part will leak or not.

Deal with the gaps in the tiles.

For dealing with the gaps of ceramic tiles, I personally recommend two methods to everyone. The first method is to make beautiful seams on the tile gaps; The second method is to pour waterproof glue directly into the gaps of the tiles. The processing steps are as follows:

First of all, we also need to clean the inside of the tile gaps. Generally, a thin blade is used to slide back and forth, after which the sand is removed and scrubbed clean.

Pour beautiful seam glue or glue waterproof glue into the gap. When operating, it is necessary to ensure that the upper surface of the glue is higher than the surface of the tile, so as to ensure that the joint agent or waterproof adhesive can be higher than the ground after drying.

Clean up and do a closed water test. At this time, this part can be cleaned and a water storage test can be done to judge whether the repair is qualified.

Tips: When making waterproofing for the bathroom, we must focus on waterproofing all the roots, including the roots of the pipe wall. Generally, the waterproof brush should be made into an arc shape, so that it can effectively play the role of waterproofing.

The wall tiles or floor tiles paved in our bathroom must be paved with seams. In this way, the gap can be sealed. Do not take seamless paving, because seamless paving can not achieve the sealing of tile gaps, and it is difficult to deal with subsequent water leakage.

To do waterproofing, you need to do it on the front of the water.

Dig excellent permeable crystalline waterproof, you can do it yourself.

If the cement surface is waterproofed, use a super permeable waterproof guard to do waterproofing (if there are cracks, gaps and potholes on the cement surface, fill the complete with Meiding porcelain glue and then do waterproofing).

For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).

Exterior wall paint can be made waterproof with transparent waterproof repair adhesive.

The product will penetrate into the base layer and make the base layer waterproof. The product is recommended to be constructed in a dry place, the drier the base surface, the deeper the product can penetrate, if the base surface is full of moisture, high density, the material can not penetrate well. Regarding the principle of waterproof plugging, the source of water leakage is not blocked, and the water will only continue to penetrate into the wall, which will exist inside the wall for a long time, and will leak out from other parts of the wall when the water reaches a certain level.

The problem cannot be solved, and only by spraying waterproofing agent on the outside of the roof or exterior wall so that the water cannot penetrate into the wall and flow away can the problem be completely solved.

Hello, I have seen your question and am sorting out the answer, please wait a while

First of all, you should find a waterproof coating that can be directly brushed on the tile, and the paint should have the function of wear-resistant, blister-resistant and corrosion-resistant. Here I recommend Qinglong No. 3 to you, this material can be directly used on the bathroom tiles to do waterproofing, no need to smash bricks!

It is not possible to do waterproofing on the surface of the tile, and the ground must be waterproofed before decoration.

No, let's knock it out and do it again.