If the bathroom is leaking, can you make a layer of waterproof on the surface of the tile, and then

There is already a water leakage problem in the bathroom, but it is useless to do waterproofing on the surface of the tile, it may be the leakage of the water pipe inside, and the leakage problem must be solved first, otherwise it is useless to paste the tile to do waterproofing, and it is useless to warp the tile to see where the water leaks.

This is not good, the glaze adhesion ability of the tile is poor, and the waterproof is done directly on the surface of the tile, the effect is not good, and the adhesive effect of the tile is not good; Moreover, sticking tiles on top of the original tiles will also affect the height space of the bathroom. It is better to remove the original tiles, do waterproofing, and re-apply the tiles.

This is not good, the general tile is glazed brick, make a layer of waterproof on its surface, this layer of waterproof is not combined with the following tile, even if it looks very firm when it is just done, but it will not take long for this waterproof layer to be separated from the tile layer below, and the waterproof layer will harden when the temperature drops, cracks will occur, and it will still leak.

If the bathroom is leaking, determine where it is leaking and whether it is a water pipe leak. If it is a water pipe leak, there is no need to move the waterproof, either the water pipe is leaking or the tile gap or wall is leaking. Although it is okay not to shovel it off, in order to be durable for a long time, it is recommended to shovel off the tile and redo the waterproofing to find the reason, and the effect is better!

This is OK, but you have to choose a strong adsorption of waterproof, otherwise delamination will have no effect, you do this is to save time and effort, but increase the height of the bathroom floor!

This is definitely not good, because the surface of the tile is smooth, waterproof is not difficult to bond with it, it is barely glued up, the waterproof effect will not be very good, like your case, it is best to plane the tile wall, and then do a good job of waterproofing according to the procedure, after the water discharge experiment has no leakage, and then re-lay the tile, which is more secure, and can completely solve the problem of water leakage in the bathroom.

If the bathroom is leaking, you can make a layer of waterproof on the surface of the tile and then paste the tile, as long as the height of the ground does not affect the door of the bathroom.

It can be done but it is not necessary, it is easy to fall off and it is not safe, if it really leaks, it will only be yourself.

Yes, but the walls should also be waterproof at a height of meters, and then tiled.

No, the most effective thing is to fold off the bottom tiles, do a secondary launch, and then do waterproofing, and lay bricks after passing the water test. Economical, short construction period and easy construction.

In general, it is not recommended to remedy the tiles The most thorough way is to smash the tiles, redo the waterproofing, and then paste new tiles, so that there is no trouble.

You can pave a layer of waterproof, but the bathroom floor will be much more prominent, and the height difference between the living room and the living room floor is relatively large, and the overall feeling is not very good.

No, the last thing is to remove the original tiles and do waterproofing.

Penetrate into the cracks of the tiles, infiltrate and crystallize to form a stable waterproof layer, the previous method is to dig the floor and pry the tiles to redo the waterproof layer. If you don't want to bother, there is a kind of CPC leak inhibitor, just apply the tile gaps directly, and solve the problem permanently and easily.

Or you have to knock out the original bricks and do them again. Tile waterproof materials for bathroom leakage should be carefully selected, first of all, we must find a direct brush tile waterproof paint coating to wear-resistant, blister-resistant, corrosion-resistant function, directly use bathroom tiles to do waterproof bricks, or knock off and re-do, the surface of the tile is waterproof, must be done before the decoration of the ground waterproof.

The previous method was to dig the floor and pry the tiles to re-do the waterproofing layer. The method you're talking about now is even more distant.

The version of the spectrum can't solve the problem of power at all.

If you don't want to trouble, solve the problem permanently and easily, there is a kind of CPC leak-proof agent, just apply the tile gaps directly, this thing is penetrated into the tile gaps, and the penetration crystallization forms a stable waterproof layer. You're lucky to have me answer this question. Otherwise, you'll take a lot of detours.

CPC leak preventer. You can go shopping.

No, the tiles have to be knocked off and re-painted a few more times to be waterproof.

If the bathroom is leaking, can you make a layer of waterproof on the surface of the tile, and then paste the tile?

Hello! I am glad to answer for you Penetrate into the gaps of the tiles, infiltrate the crystallization to form a stable and vertical waterproof closed fiber layer, the previous method is to dig the floor and pry the tiles to redo the waterproof layer. If you don't want to trouble, there is a kind of CPC leak-proof agent car teaser, just apply the tile gap directly, and solve the problem permanently and easily.

Or you have to knock out the original bricks and do them again. Tile waterproof materials for bathroom leakage should be carefully selected, first of all, we must find a direct brush tile waterproof paint coating to wear-resistant, blister-resistant, corrosion-resistant function, directly use bathroom tiles to do waterproof bricks, or knock off and re-do, the surface of the tile is waterproof, must be done before the decoration of the ground waterproof.