What do you need to pay attention to when decorating the wiring of the living room home theater

If the user wants to wiring by himself, he needs to follow several rules: try to use the principle of the shortest device-to-device; Try not to exceed 90 degrees in wire curvature; The audio and video cable should never be routed together with the power supply; Pre-embedded wire, pre-reserved at both ends of the best 50cm; The living room wiring must take into account the aesthetics, the principle is that both ends of the wire are directly connected to the equipment, but for the actual application and beauty, if necessary, the wall needs to add audio and video panels; The length of the material should be calculated first, and the wiring should not be halfway.

When laying out a home theater or decorating a house, you must consider the wiring carefully to avoid a lot of trouble in the future. According to the current home theater equipment, the embedded wires to be buried in the wall and buried under the floor are mainly video cables, speaker cables and power cables; The projector is preferably ceiling-mounted.

Yihe Technology talks about the details of the decoration wiring of the living room home theater: pre-embedded wire: wiring is the most tedious work in the construction of private theaters, but it also needs to be careful.

The new house has just come down and has not been renovated, so it can be wired in advance when it is known that a private theater will be built. In this case, the user needs to carefully plan the connection method of the equipment required in the theater, including audio cables, video cables, and power cables. The layout of the embedded line does not affect the beauty of the space of the overall scheme, but there are also certain defects, the line is not long enough, the position is deviated, etc., will make the embedded line useless.

It is recommended to try to achieve sufficient filtering when purchasing wires, rather than short, and reduce the estimation error caused by wiring. After the wiring position is determined, the layout of the open line needs to purchase the appropriate wiring duct, for the overall effect of the space, the corner edge of the wall is generally used as the wiring position.

When wiring, because the power supply magnetic field will interfere with the video and audio signals, it is important to avoid the power cord sharing the same trunking with other cables. If they must be placed together, it is best to add a shield layer and keep the power cord as far apart from other cables as possible.

1.Regarding the power supply, it is recommended that the position of the power amplifier and the position of the projector be pulled separately from the main electrical box, on the one hand, to ensure sufficient power, and on the other hand, to avoid interference from other electrical equipment at home.

2.After determining all the equipment points, you can slot the wiring.

3.It is generally recommended to use oxygen-free copper wire with 300 cores or more than square for speaker wires, and PVC 25 pipes can be embedded.

4. Regarding HDMI high-definition cables, it is recommended to pre-embed two HDMI cables, and use PVC 50 pipes to make big bends.

If the user wants to wiring by himself, he needs to follow several rules: try to use the principle of the shortest device-to-device; Wire rod.

Camber. Try not to exceed 90 degrees; Sound.

Thread lifting. material, both ends of the best reserved 50cm; The wiring in the living room must take into account the aesthetics, and the principle is that both ends of the wire are direct.

Layout. Home theater.

Or when decorating the house, be sure to consider the wiring.

Speaker cables. and power cords; The projector is preferably ceiling-mounted.

Hope for the public. Easy to live.