-
Anonymous users2024-01-24Generally, the length is 600-650mm, the height is 900mm, and the general installation width is about the same at 600mm. If you consider the kind of split handrail, there is no need to consider this problem if there is no connection in the middle;
Toilet seat option one.
Nowadays, the length of the toilet lid is basically more than 50 cm, but many toilet seats have reached about 52-58 cm, and the length of the inner diameter of the seat corresponding to the size of the toilet lid is basically about 30 cm, and when we buy the toilet lid, we can measure the length of the toilet bowl to the front tip of the water tank along the center line of the toilet, which is generally more than 50 cm. >>>More
Mainly look at the model of the toilet to develop the installation of the toilet procedures, it is easy to say that it is complicated, and it is not difficult to do more, the current installation of the toilet is very simple, take the pure conjoined toilet as an example: first of all, the water parts in the water storage tank, the drainage center pipe is good, debug the flexible activities of each component, in place, there is no mechanical jamming, (the complete set of water supply and drainage parts have installation drawings assembled in accordance with the drawings of the components) will purchase the sealing flange on the drain port of the toilet, and play a circle of sealant on the ground at the position of the toilet, Look at the drain outlet and align the sealing flange of the toilet drain with the drain and put it well, find the correct position, find the level, fix it, and then play a circle of sealant around the toilet bowl, and connect the connecting hose of the water valve, and you can do it
Generally, if you choose a more reliable intelligent manufacturer, you will have after-sales service to introduce you, and it is recommended to choose Royalstar.
The installation of the wall-hung toilet is very simple, only there is a bolt fixed under each side of the back of the toilet, the drain and the water inlet are pre-reserved according to the size, and the drain and water inlet of the toilet are directly inserted into the pipe with the sealing ring after the lubricant is aligned, and the fixing nut can be tightened
Before installation, use the fixing piece to install it on the back of the column on both sides of the door frame, then use the infrared level to lay the horizontal and vertical degrees, and then use steel nails to nail the fixing piece firmly on the gap of the brick wall.