The house is decorated, the bathroom is very afraid of water seepage, and the decoration company sug

Updated on Bathroom 2024-07-21
6 answers
  1. Anonymous users2024-01-24

    It's no problem if the waterproof is done well, don't listen to the one who fools the money, and ask him for compensation for the water leakage.

  2. Anonymous users2024-01-23

    First of all, I need to tell you that tile adhesive is used to paste tiles, and the main function is to make the tile paste more firm and not easy to fall off, and it does not have any waterproof effect, so if you are worried about bathroom leakage, then you only need to do a good job of the waterproof layer under the tile.

    Secondly, the bathroom is a relatively stable part of the home decoration structure, so the requirements for waterproofing are relatively low compared to the balcony and roof, and the bathroom is recommended to use mortar waterproofing agent, which is not only firmly bonded with the base surface but also puncture-resistant, with high strength, and the waterproof life can be the same as the life of the building, which is the most widely used material in home decoration now.

    Finally, in addition to choosing the right waterproof material, the standard construction is also equally important, only according to the instructions for construction can ensure the best waterproof effect, and finally achieve the purpose once and for all.

  3. Anonymous users2024-01-22

    Tile adhesive is only two years to hear, before people decorate the house is cement. Tile adhesive is a little more expensive, just paste, does not affect the problem of water leakage, water leakage means that the waterproof is not done well.

  4. Anonymous users2024-01-21

    The bathrooms are all waterproof before the floor tiles are pasted, so you don't have to listen to them.

  5. Anonymous users2024-01-20

    It's good to do ordinary waterproofing, don't listen to the decoration.

  6. Anonymous users2024-01-19

    Doing a good job of basic waterproofing is the key, tile adhesive is used to paste tiles, and does not have waterproof function.

Related questions
3 answers2024-07-21

1. When the house is under construction, the bathroom has been waterproofed, but it is still necessary to do waterproof treatment according to the regulations during decoration. >>>More

2 answers2024-07-21

If it is exceeded, mind ventilation for a period of time, buy some potted plants (pothos, spider plants, etc.) and put some activated carbon to absorb it.

2 answers2024-07-21

Dig the best permeable waterproofing can be done by yourself. >>>More

3 answers2024-07-21

Based on the description and photos, it can be judged that it is caused by the problem of the stucco layer. This is due to the quality of the materials used in the cement mortar for the wall priming leads to high alkalinity, easy to absorb water, may be decorator did not wait for the bottom cement mortar to dry to do the paint whitewash, in the closed environment of the bathroom bath generated by the water vapor is collected by the stucco layer, damp and fall off. It is advisable to knock off the surface of the stucco to paste the tiles. >>>More

1 answers2024-07-21

The reason why you can't leave is to see why. Whether the small water pipe is blocked, or the slope is not adjusted well when laying the floor tiles, resulting in the ground water can not be collected to the floor drain, so that the water discharge is not clean. So it depends on the situation. >>>More