-
Anonymous users2024-01-241. Pour boiling water into the sink to solve the oil blockage.
The most common reason for the blockage of the pool is that the fat is clogged on the pipe, this solution only requires a pot of boiling water to pour into the sink, and then add some cold water to make the water temperature at about 60-70 degrees, if the water heater and the kitchen are connected, it is best to directly rinse the hot water for 3 minutes.
2. The water puller sucks loose debris to solve the clogging of the sink.
To ensure that the lower mouth of the water puller is sealed by water, so that the water has the effect of sealing the air, cover the water puller with the drain and press down to drain the air and water in the water puller, and then pull it up so that the negative pressure will bring things out or loosen; At the same time, it should be coordinated with the water flow, and generally if there are many debris, you need to pull it out a few more times.
1. Boil a pot of boiling water, put in a certain amount of dish soap or washing powder, and pour it into the sewer pipe; >>>More
It may be that there are cloth fibers intertwined with rice and vegetables in the sewer, and the sewer is blocked, so you can use a wire of medium hardness, bend a hook in the front, stretch into the sewer pipe, hinge a few times and then expand and contract back and forth a few times, and take a look. >>>More
No, there must be a drain pipe under the sink, and if you need a floor drain, you can string a hole in a suitable place next to it to make a floor drain.
Unscrew both ends of the elbow under the pool, then remove the blockage and put it back on.
No, these tubes are resistant to high temperatures, and if they leak, you may have purchased a counterfeit product. Do you try to drain the water to see if it leaks? Don't zoom in too much, just try slowly.