-
Anonymous users2024-01-24Remove the leakage point with a chisel out of a 3 cm groove. It should be a few centimeters wider than the leaking area and clean it with a brush dipped in water. Then use CF-2000 high-efficiency composite waterproofing agent to seal and compact. It's as simple as that.
-
Anonymous users2024-01-23First of all, it is necessary to check whether it is a leak in the toilet or a leak in the sewer interface (in the part between floors), if it can be determined that the toilet is leaking, it is necessary to disassemble the toilet bowl and repair the leak with waterproof material at the drain. After restoring the toilet. Nowadays, toilets are not fixed with expansion screws, they are directly bonded to the floor tiles with glass glue, and when disassembled, they are cut directly along the seams with a paper cutter.
This should be caused by a leak in the water pipe, or a broken waterproofing layer in the bathroom. >>>More
It is caused by water seepage on the upper floor or water seepage from the buried wall water pipe in the bathroom, the best way is to deal with it thoroughly, of course, the movement is slightly larger, after all, it has been lived for a long time.
How old is the pumpkin toilet ready to buy one to use when taking the child out, of course, you should buy one that is suitable for the child, you don't need to buy too big, you can buy a child that is suitable for the application, the best.
To install a split toilet, you have to start the pier, because the general squatting toilet has a submersible bend, and the installation needs to be high to force the conjoinee, so this factor should be taken into account!
The newly installed toilet sealant has blistering, which may be due to the fact that it was not installed properly at the time of installation. It will not affect the use.