-
Push the metal buckle outward with your hand to separate the buckle from the lamp, then hold the square plastic part of the lamp with your hand, and slowly pull it down to take it off.
-
You can directly remove the lamp, just use force.
Hello On the four straight sides of the lamp, there is a right-angle slide plug (reach out to the lamp around and touch it), break the four slides outward, the lampshade will be taken off, and you will naturally install it.
You use a utility knife to remove the ceiling next to the lamp in two. Remember to pin the knife to the corner of the gusset.
In ceiling lamps there are three symmetrical shade fixed switches, such as shears to indicate the direction. >>>More
Generally, there is a hook around the lampshade of the square ceiling lamp to talk about the lampshade on the low plate of the lamp, you touch it counterclockwise with your hand on the roof, you should be able to touch the judgment skin, open the four hooks, you can see the lamp and the lamp card = mouth, dig the difference to remove the bulb and replace it.
The lampshade is buckled up, grab both sides and pull down.